RIDGID® 64283 Chain Knocker With Carbide Tip, 1/4 in, Steel

RIDGID offers a wide variety of FlexShaft® accessories in different sizes for the most cleaning efficiency on the jobsite. Depending on pipe size, pipe material and blockage, there are different chain Knockers and Brushes for every job. Knowing when to choose Brushes or standard, carbide tipped or penetrating head chain Knockers can help you get the best performance out of your machine.

RIDGID® Chain Knocker, 1/4 in, Steel, 4 in Width, 10 in Height, 1.405 in Depth, For Use With: FlexShaft® Model K9-12, K9-102 1-1/2 to 2 in Drain Cleaning Machines, Additional Information: 1-Chain

• Smooth Chain Knockers - Smooth chain knockers clean drains wall to wall in all soft walled pipes. They are efficient in removing grease, hair and other soft blockages
• Chain Knockers With Carbide Tip - Chain Knockers with carbide tips clean wall to wall and are ideal for removing scale and light roots as well other grease and soft blockages in hard walled pipe types.
• Penetrating Chain Knockers With Carbide Tip - Penetrating head chain knockers with carbide tips can be used to open full blockages such as grease, hair, and other soft blockages.
• Nylon Cleaning Brushes - Nylon Cleaning Brushes can be used for lightly cleaning pipe walls. Brushes can also be used for relining applications such as spray coating.
• Nylon/Steel Brushes - 50% Nylon and 50% Steel Brushes can be used for light grinding of pipe walls and to help clear debris sitting at the bottom of a pipe. These brushes can also be used for relining applications such as preparing PVC walls for a liner.
• Ball and Drop Heads - Penetrating heads only that can be attached with standard chain knockers or brushes when carbide tipped chains are too aggressive. Ball heads designed for optimal in pipe negotation in smaller lines and drop heads designed to navigate down stacks in back to back applications.
• FlexShaft Sandpaper Blades - FlexShaft sandpaper blades are a great tool to aid in pipe rehab jobs. The sandpaper attachments can be used to prep pipe before CIPP patching or relining, to smooth transition edges after a reinstatement, and as a finishing tool when descaling or milling.

• Catalog https://assets.unilogcorp.com/267/ITEM/DOC/RIDGID_64283_Catalog.pdf
• SDS https://assets.unilogcorp.com/267/ITEM/DOC/RIDGID_66663_SDS.pdf
• Specification Sheet https://assets.unilogcorp.com/267/ITEM/DOC/RIDGID_64283_Specification_Sheet.pdf
• Specification Sheet https://assets.unilogcorp.com/267/ITEM/DOC/RIDGIDreg_64283_1.pdf