Mission™ BAND-SEAL® C 420 Specialty Coupling, 4 x 2 in, Cast Iron x Cast Iron/Plastic or Steel, Stainless Steel

Shielded, transition couplings designed to connect similar and dissimilar pipe materials and sizes. Join Cast Iron, Copper, Schedule 40 Plastic, Stainless Steel, Steel, Tubular, Thinwall Plastic and Extra Heavy Cast Iron pipe. For non-pressure, gravity flow applications only. Recommended for above ground installations. Easy to install and reuse.

Mission™ Specialty Coupling, C Series, 4 x 2 in Fitting, Cast Iron x Cast Iron/Plastic or Steel Connection, 1500 psi Tensile Strength, 250 % Elongation, 60 in-lb Torque, Material Standard: ASTM A240, A240M-06, C564-03, C1460-00, Stainless Steel, Domestic/Import: Domestic

• MISSIONMADE™ products are easy-to-install and reuse
• Increased band tension secures pipe end, forming a watertight seal, axially tapered design distributes and dissipates internal stresses
• Natural rubbers permit considerable distortion withstanding tension and compression, more pliable, easier to install in cold weather applications than elastomeric PVC gaskets
• Thick shear band controls load bearing between coupling and pipe surface, opposing shear forces while maintaining pipe alignment
• Internal pipe stop for proper pipe positioning and noise/vibration reduction
• Stainless steel components resist corrosion in various environments
• Sealing O-rings under each clamp prevent pipe end slippage for a reinforced joint seal
• 301 Series stainless steel worm drive clamps
• 300 Series stainless steel shield
• Molded, one-piece elastomeric sealing gasket

• Instruction/Installation Manual https://assets.unilogcorp.com/267/ITEM/DOC/Mission_0803635_Instruction_Installation_Manual.pdf
• Submittal https://assets.unilogcorp.com/267/ITEM/DOC/Mission_C_315_Submittal.pdf
• Instruction/Installation Manual https://assets.unilogcorp.com/267/ITEM/DOC/Mission_C_315_Instruction_Installation_Manual.pdf