Sioux Chief StrongArm™ 525 Series 525-16WLB Twisted Bracket, Steel, Galvanized, Surface Mounting

Sioux Chief 525 Series StrongArm™ with shower WallNut LockBlock™ bracketing system shall be used where necessary for securing 1/2 in CTS copper stub outs when penetrating a wall. Bracket shall be corrosion resistant with twisted ends to mount to the surface of wood or metal studs. System shall include approved hardware for fastening brackets to stud wall. System shall include slideable, plastic block device to position and secure shower riser stub out at any desired location within stud cavity. Each block shall include four screws for tightening. When screws on blocks are tightened, compression of blocks prevents lateral movement on brackets and simultaneously compresses on tube to prevent stub out movement.

Sioux Chief StrongArm™ Twisted Bracket, 525 Series, Surface Mounting, 16 ga Gauge, #6 Screw, For Use With: 16 in Stud Bay, Steel, Finish: Galvanized, 140 deg F, 17-1/4 in L x 5/8 in H, Domestic/Import: Domestic

• Rigidly secures any 1/2 to 1 in CTS stub out and prevents all movement
• LockBlocks™ are pre-assembled on a pair of brackets or available with 2-1/2 in screws to mount directly to structure
• Twisted brackets easily mount to the face of the stud and L-bent brackets mount inside the stud cavity
• LockBlocks™ compress on tube and brackets after screws are tightened