TAC VT2343 PopTop Zone Valve Body, 3/4 in, Inverted Flared, Forged Brass

Erie's line of motorized hydronic valves, the PopTop, provides convenient, reliable and easy installation for a variety of heating and cooling applications. The PopTop makes installation a snap with easy, one handed removal or engagement of the actuator to the valve body.

TAC PopTop Zone Valve Body, VT Series, 3/4 in Nominal, Inverted Flared Connection, 2-Way Number of Ways/Position, 300 lb/sq-in Static, 15 lb/sq-in Steam, 3.5 Cv Flow Coefficient (Cv), Nickel-Plated Brass Stem, Brass Seat, Forged Brass, Hot or Chilled Water, 50% Glycol Service, 32 to 200 deg F Fluid, 104 deg F Ambient

• Valve bodies and actuators provide easy installation for a variety of heating and cooling applications
• Valves actuator can be installed after valve body has been installed onto fan coil, baseboard or air handler
• Direct replacement for all existing two position pop-top applications
• Hysteresis synchronous motor for long life
• Spring return operation provides a fail-safe
• Actuator-mounts directly onto valve body without need for linkages or calibration
• Buna-n paddle
• Actuator can be replaced without any tools or removal of valve from system
• ANSI class IV (0.01%) with pressure at inlet (B-port/A-port, if 3-way) seat leakage
• Two position (on/off) control of fluid flow in a wide variety of heating and cooling applications
• Wide variety of Cv for better control

• Catalog https://assets.unilogcorp.com/267/ITEM/DOC/TAC_VT2213G23U020_Catalog.pdf
• Instruction/Installation Manual https://assets.unilogcorp.com/267/ITEM/DOC/TAC_VT2312_Instruction_Installation_Manual.pdf
• Specification Sheet https://assets.unilogcorp.com/267/ITEM/DOC/TAC_VT3212G13A020_Specification_Sheet.pdf