Danfoss RA 2000 Series 013G8018 Radiator Thermostat Valve Body, 3/4 in, FPT x MPT Union Tailpiece, 10 psi, Nickel-Plated

RA 2000 thermostatic radiator valves regulate the flow of hot water or low pressure steam through free-standing radiators, baseboards or convectors in hot water and two pipe steam systems. Operators and valves are packaged separately to allow an installer to select a suitable combination for each application.

Danfoss Radiator Thermostat Valve Body, RA 2000 Series, 3/4 in Nominal, FPT x MPT Union Tailpiece Connection, 10 psi, 2.1 Cv Flow Coefficient (Cv), EPDM Disc, Finish: Nickel-Plated, LP Steam, Water Service, 250 deg F, 6.8 in L

• Side-mount
• Valve-mounted operators provide fast acting modulating control of the space temperature through a patented vapor charge, ensuring the highest level of comfort control
• Standard valve-mounted operators are equipped with a "snap-action" mechanism that allows for easy installation and removal without the use of tools
• RA 2000 valves are fitted with a packing gland assembly that is replaceable while the system is in operation
• Sturdy EPDM rubber valve disc provides a seal against the valve seat at differential pressures of up to 15 lb/sq-in in hot water heating systems, while 15 lbf/sq-in for low pressure steam systems
• Manual plastic cap supplied to protect the valve pushpin and provide manual control of the valve during installation
• Valves remain normally open with no operator-mounted

• Instruction/Installation Manual https://assets.unilogcorp.com/267/ITEM/DOC/Danfoss_013G8018_Instruction_Installation_Manual.pdf
• Specification Sheet https://assets.unilogcorp.com/267/ITEM/DOC/Danfoss_013G8018_Specification_Sheet.pdf
• Instruction/Installation Manual https://assets.unilogcorp.com/267/ITEM/DOC/Danfoss_013G8018_Instruction_Installation_Manual.pdf
• Specification Sheet https://assets.unilogcorp.com/267/ITEM/DOC/Danfoss_013G8018_Specification_Sheet.pdf