AXIOM MF200 Hydronic Mini System Feeder, 15 lbf/sq-in Cut-Out, FPT Discharge, 6 gal Capacity, 115 VAC

AXIOM Hydronic Mini System Feeder, 115 VAC, 60 Hz, 1 ph Phase, 15 lbf/sq-in Cut-Out, FPT Discharge Connection, 6 gal Capacity, Pump Rating: 0.7 gpm, 50 W, 16 in H x 11-3/4 in W

• The pressure pal is ideal for feeding and pressurizing closed hydronic systems that do not require cold static fill pressures higher than 25 lbf/sq-in
• It is compatible with both water and glycol/water solutions
• 6 US gal (22.7L) tank for storage and mixing
• Power supply plugs into any standard 115 VAC outlet
• Diaphragm pump can run dry without damage
• No direct connection to potable water supply eliminates need for backflow prevention
• Make-up fluid stored in the feeder tank can be pre-treated
• Diverter valve allows easy purging of air on initial start-up, and manual agitation of solution
• Prevents major floods - in the event of system rupture, only the contents of the tank will be pumped into the system
• Provides leak detection - dropping fluid level provides immediate notice that the system has developed a leak
• Fluid drained for service can easily be put back into the system
• Fluid level switch shuts the pump off if the storage tank level gets too low
• Power supply adapter with LED power light
• 0.04 L/sec (0.7 gal/min) at free flow, self-priming upto 1.2 m (4 ft) pump performance
• Feeder shall be compatible with glycol solutions of upto 50% concentration
• Pump shall be capable of running dry without damage
• 1/2 in FPT discharge connection

• Instruction/Installation Manual https://assets.unilogcorp.com/267/ITEM/DOC/Axiom_MF200_Manual.pdf
• Specification Sheet https://assets.unilogcorp.com/267/ITEM/DOC/Axiom_MF200_Specification_Sheet.pdf