WATTS® PLT Series PLT-35 Potable Water Expansion Tank, 14 gal Capacity, 1 in, MNPT, Stainless Steel, 150 psi

This potable water expansion tank is used on gas, oil or electric, direct-fired, residential water heater and hot water storage tank applications to absorb the increased volume of water created by thermal expansion. It also maintains balanced pressure throughout the water supply system by keeping system pressure below the T&P relief valve setting. This field-adjustable steel tank is air pre-charged at 20 psi, volume 14.0 gallons, designed with an FDA-approved polypropylene liner and butyl rubber diaphragm, copper-lined steel and 1 in female inlet connection. An expansion membrane prevents air-to-water contact in the tank ensuring a long system life. ANSI/NSF 61 certified. The maximum pressure is 150 psi (10 bar).

WATTS® Potable Water Expansion Tank, PLT Series, 14 gal Capacity, 1 in Connection, MNPT Connection, 10.7 gal Acceptance Factor, Butyl Rubber Diaphragm, Stainless Steel, 150 psi, 200 deg F, 16 in Dia x 21.7 in L

• Rugged flexible butyl diaphragm
• Field adjustable pre-charge
• In-line and free-standing models
• Can be used with most standard hot water heaters and storage tanks

• Instruction/Installation Manual https://assets.unilogcorp.com/267/ITEM/DOC/WATTS_PLT_12_Instruction_Installation_Manual.pdf
• Specification Sheet https://assets.unilogcorp.com/267/ITEM/DOC/WATTS_PLT_12_Specification_Sheet.pdf
• Warranty Information https://assets.unilogcorp.com/267/ITEM/DOC/WATTS_PLT_12_Warranty_Information.pdf