WATTS® PLT-12 Potable Water Expansion Tank, 4.5 gal Capacity, 3/4 in, Male Threaded, Steel, 150 psi

This potable water expansion tank is used on gas, oil, or electric, direct-fired, residential water heater and hot water storage tank applications to absorb the increased volume of water created by thermal expansion. It also maintains balanced pressure throughout the water supply system by keeping system pressure below the T&P relief valve setting. This field-adjustable steel tank is air pre-charged at 20 psi, volume 4.5 gal, designed with an FDA-approved polypropylene liner and butyl rubber diaphragm, copper-lined steel, and 3/4 inch male inlet connection. An expansion membrane prevents air-to-water contact in the tank ensuring a long system life. IAPMO listed and ANSI/NSF 61 certified. The maximum pressure is 150 psi (10 bar).

WATTS® Potable Water Expansion Tank, Series: PLT Series, 4.5 gal, 3/4 in Connection, Male Threaded Connection Type, Butyl Rubber Diaphragm, Steel, 150 psi, 200 deg F, 13-1/2 in H x 10-1/2 in Dia, Additional Information: 10-1/2 in Dia, For Use With Water Heater

• Prevents over-pressure caused by thermal expansion

• Instruction/Installation Manual https://assets.unilogcorp.com/267/ITEM/DOC/WATTS_PLT-12_Instruction_Installation_Manual.pdf
• Specification Sheet https://assets.unilogcorp.com/267/ITEM/DOC/WATTS_PLT-12_Specification_Sheet.pdf