Thermo 2000 Turbomax-23 Turbomax Indirect Water Heater, 26 gal, 400000 to 900000 Btu/hr, 117 to 264 kW

Thermo 2000 Turbomax Indirect Water Heater, 26 gal Capacity, 400000 to 900000 Btu/hr, 117 to 264 kW, 9 gpm Flow Rate, 807 to 1666 gph First Hour Delivery, <0.5 deg F/hr Standby Loss, 99 % AFUE Rating, MNPT Connection, 300 psi, 58.9 sq-ft Coil Heating Surface, Continuous Flow: 86 to 515 gph, HCS, Finish: Durable Epoxy Painted, 200 deg F, 29 in Dia x 74 in H

• Heats water instantaneously, only when needed and keeps energy consumption to a minimum
• Patented technology with heat transfer efficiency reaching 99%
• Heats water in greater amounts than any other hot water heater, while minimizing temperature swings
• Reduces and scrubs the accumulation of scale deposits that diminish the efficiency of traditional water heaters
• Adapts to all thermal energy sources (gas, oil, electricity, wood, solar and recuperated heat), the one that best suits your needs
• Heats water without altering it's quality and is an excellent choice anywhere health considerations are a high priority
• Can be connected to your existing heating system, one boiler is usually enough
• Can reduce heating costs by upto 30%
• Resists corrosion and thermal stress
• When properly installed, turbomax will outlive and out-perform traditional water heaters
• Pressure relief valve set at 50 psi
• Temperature/pressure gauge
• Aquastat with adjustable temperature differential prewired for 120 or 24 V
• Fiberglass insulated design
• Drain valve, domestic hot/cold water inlet, boiler return/supply
• Copper heat exchanger inside high quality carbon steel tank

• Catalog https://assets.unilogcorp.com/267/ITEM/DOC/Thermo_2000_Turbomax_23_Catalog.pdf
• Instruction/Installation Manual https://assets.unilogcorp.com/267/ITEM/DOC/Thermo_2000_Turbomax_23_Instruction_Installation_Manual.pdf