Victaulic® P47-1-1/2 Dielectric Adapter, 1-1/2 in Plain End x 1-1/2 in Sweat, Iron

The Victaulic® QuickVic™ SD Installation-Ready™ system is the most efficient and economical way to join carbon steel piping systems sized 2 in, DN50 and down. It offers a significant total installed cost savings when compared to current pipe materials and installation methods used, including carbon steel thread or press and copper press or sweat. Available in sizes 1/2 to 2 in, DN15 to DN50, the products can be used on SCH 10 to 80 carbon steel pipe and have a maximum working pressure and temperature rating of 300 psi. Victaulic® plain end couplings are primarily designed for use on standard weight steel pipe (SCH 40) and may be used on light wall steel or other metallic pipe, such as aluminum or stainless steel. They are not intended for use on plastic pipe, plastic-coated pipe or brittle pipe, such as asbestos cement or cast iron, nor are they intended for use on pipe with a surface hardness greater than 150 Brinell.

Victaulic® Dielectric Adapter, Adapter Fitting, 1-1/2 in Connection Size 1, Connection Type 1: Plain End, 1-1/2 in Connection Size 2, Connection Type 2: Sweat, Plain End|Sweat Connection, Iron, Material Construction: Cast Ductile Iron, 300 psi, 1.9 in Dia

• Most economical and efficient pipe joining solution for schedule 5 through 80 carbon steel piping systems sized 2 in/DN50 and down
• Rigid couplings and fittings featuring patented Victaulic® Installation-Ready™ technology
• QuickVic™ SD Installation-Ready™ products include patented "leak-if-not-tightened" technology during initial installation
• Seal is designed to leak until the coupling or fitting is mechanically secured on the pipe
• Ready-to-install fitting

• Specification Sheet https://assets.unilogcorp.com/267/ITEM/DOC/Victaulic_P47_1_2_Specification_Sheet.pdf
• Video Link https://www.youtube.com/embed/nFkrYSooVlg