WATTS® B6001 Series B6001-M2-1 Ball Valve, 1 in, Solder, Bronze, 600 psi
- Manufacturer: Watts Water Technologies
- Brand Name: WATTS®
- Part#: WTSB-6001-M2-1
- MPN: B6001-M2-1
- Min. Order Qty: 1
- Qty. Interval: 1
-
Availability:
- Branch Availability
-
Price:
-
Other Branch Availability
Series B6000 and B6001 two-piece, standard port, bronze ball valves are used in commercial and industrial applications for a full range of liquids and gases. They feature a blowout-proof pressure retaining stem and a standard port orifice ensures minimal pressure drop. Durafill® and Uniseal® seats and chrome-plated brass ball provide lasting service. Model B6000 has threaded NPT end connections and model B6001 has solder end connections. Pressure rating for 1/4 to 3 in (8 to 80 mm) is 600 psi WOG (non-shock) and 150 psi WSP 4 in (100 mm) is 400 psi WOG (non-shock), 125 psi WSP.
WATTS® Ball Valve, B6001 Series, 1 in Nominal, Solder Connection, Standard Port, 600 psi, Gas, Liquid Media, 3-3/4 in Inlet to Outlet Length, 2-1/4 in Top to Inlet Center, 7/8 in Opening, Quarter-Turn Handle Operator, 40 Cv Flow Coefficient (Cv), Material Standard: ASTM B16, ASTM B584 C84400, Bronze Body, PTFE Seat, Brass Stem, RPTFE Seal, Brass/Carbon Steel Trim, RPTFE Packing, Carbon Steel Handle, Brass Ball, RPTFE Softgoods, 0 to 450 deg F
| Ball Material | : | Brass |
| Body Material | : | Bronze |
| Connection Type | : | Solder |
| Flow Coefficient (Cv) | : | 40 Cv |
| Handle Material | : | Carbon Steel |
| Inlet to Outlet Length | : | 3-3/4 in |
| Material Standard | : | ASTM B16, ASTM B584 C84400 |
| Media | : | Gas, Liquid |
| Nominal Size | : | 1 in |
| Opening Size | : | 7/8 in |
| Operator Type | : | Quarter-Turn Handle |
| Packing Material | : | RPTFE |
| Plumbing and Flow Control | : | Plumbing and Flow Control |
| Port Type | : | Standard |
| Pressure Rating | : | 600 psi |
| Seal Material | : | RPTFE |
| Seat Material | : | PTFE |
| Series | : | B6001 Series |
| Softgoods Material | : | RPTFE |
| Stem Material | : | Brass |
| Temperature Rating | : | 0 to 450 deg F |
| Top to Inlet Center | : | 2-1/4 in |
| Trim Material | : | Brass/Carbon Steel |
- Factory tested and designed for lasting service
- Chrome-plated brass ball is wiped clean during each operation of the valve
- Uniseal® (enhanced PTFE) seats for sizes 3/4 in and 1 in for lasting service for a wide range of liquids and gases
- Blowout-proof, pressure retaining stem
- 1/4 to 3 in pressure rated at 600 psi WOG non-shock, 150 psi WSP
- High-cycle life reinforced PTFE stem packing seal and thrust washer
- Vinyl insulator on heavy-duty, zinc-plated, carbon steel handles
- Low operating torque
- Adjustable stem packing gland
- Each valve factory tested
Specification Sheet