WATTS® N170 Series N170-M3-112 Master Tempering Valve, 1-1/2 in Nominal, NPT, 5 gpm, 125 psi, 90 to 180 deg F

The N170 master tempering valve Series is designed for use in commercial and institutional applications, to mix hot and cold water to reduce high service water temperature to the building distribution piping system. The N170 Series is designed for installation at the hot water source. Rough-in dimensions are identical to earlier N170 models making replacement fast and easy. The N170 features bronze body construction, a copper/paraffin thermostat assembly and a lockable temperature adjustment for increased safety. Polysulfone internals resist excessive heat, liming and corrosion and a single-seat design ensures tight shut-off in the event of cold water supply loss. The N170 is listed to ASSE 1017 and IAPMO cUPC in compliance with CSA B125.3. Temperature range is 90 to 180 deg F (32 to 82 deg C). Maximum pressure is 125 psi.

WATTS® Master Tempering Valve, N170 Series, 1-1/2 in Nominal, NPT Connection, 125 psi, 5 gpm Flow Rate, Hot Water Media, Bronze Body, 90 to 180 deg F

• Instruction/Installation Manual https://assets.unilogcorp.com/267/ITEM/DOC/WATTS_N170_M3_112_Instruction_Installation_Manual.pdf
• Warranty Information https://assets.unilogcorp.com/267/ITEM/DOC/WATTS_PLT_12_Warranty_Information.pdf
• Instruction/Installation Manual https://assets.unilogcorp.com/267/ITEM/DOC/WATTS_N170_M3_112_Instruction_Installation_Manual.pdf
• Warranty Information https://assets.unilogcorp.com/267/ITEM/DOC/WATTS_PLT_12_Warranty_Information.pdf