Xirtec® VXE Series 353007 True Union Ball Valve, 1-1/4 in IPS Nominal, Socket x FNPT, 232 psi, Lever Handle Operator

The IPEX EasyFit VXE series true union ball valves represent the latest innovation in thermoplastic ball valve manufacturing technology. Developed in collaboration with Giugiaro design, the VXE series replaces the well received VX series with new and cutting edge features and is designed for industrial, general purpose and O.E.M. applications. This valve features an ultra-compact double block design and full port bi-directional operation. The true union design allows the valve to be easily removed from the piping system and be fully serviced. A threaded seat stop carrier provides improved seal integrity under tough service conditions while the EasyFit multi-function handle doubles as a tool for ball seat adjustment and for tightening union nuts precisely. VXE ball valves are part of our complete system of IPEX pipe, valves and fittings, engineered and manufactured to our strict quality, performance and dimensional standards.

Xirtec® True Union Ball Valve, Series: VXE, Connection Type: Socket x FNPT, Full Port, 1-1/4 in IPS Nominal, 232 psi, Water Media, Lever Handle Operator, Material Standard: ASTM D1784, PVC Body, PTFE Seat, PVC Stem, EPDM Seal, PVC Handle, PVC Ball, Dark Gray

• The valve body, stem, ball and unions shall be made of PVC compound which shall meet or exceed the requirements of cell classification 12454 according to ASTM D1784
• The valve shall be double blocking with union ends
• All sizes shall allow for bi-directional flow
• The valve body shall be single end entry with a threaded carrier (ball seat support)
• The valve body shall have an expansion and contraction compensating groove on the molded end
• The valve body, union nuts and carrier shall have deep square style threads for increased strength
• The ball shall be machined smooth to minimize wear on valve seats
• The stem design shall feature a shear point above the O-ring to maintain system integrity in the unlikely event of a stem breakage
• The handle shall incorporate a tool for adjustment of the threaded carrier
• The handle shall incorporate a tool for adjustment of union nuts
• The handle shall incorporate a transparent PVC plug and tag holder for valve identification
• Valves shall have been pressure tested in both the open and closed positions by the manufacturer
• Valves shall be marked to indicate size, material designation, and manufacturers name or trade mark
• Valves shall be Xirtec® PVC by IPEX or approved equal

• Catalog https://assets.unilogcorp.com/267/ITEM/DOC/Xirtec_353007_Catalog.pdf
• Specification Sheet https://assets.unilogcorp.com/267/ITEM/DOC/Xirtec_VXE_Specification_Sheet.pdf