RIDGID® 50767 Power Pipe Cutter, Bare Tool/Kit: Bare Tool, 115 V, 8 in Max Pipe/Tube Dia, 1-Speed, 32 rpm Speed

The RIDGID® Model 258 Power Pipe Cutter cuts 2 1⁄2 in (65 mm) to 8 in (200 mm) schedule 10*/40 steel pipe, galvanized pipe, rigid conduit, etc. at the job site or in the shop. Powered by the RIDGID No. 700 Power Drive, the 258 is a displacement cutter that provides square cuts. The operator controls the feeding rate by pumping the hydraulic foot pump throughout the operation. A square cut with minimal burr on either 21 ft (6m) or nipple lengths of pipe is achieved quickly** without abrasive dust, sparks, or open flame. Also, the RIDGID Pipe Roller for beveling can be used to rotate the pipe while second operator uses a grinder to bevel the pipe.

RIDGID® Power Pipe Cutter, Model: 258, Bare Tool, 115 V, 20 A, 25 to 60 Hz, 1 Phase, 1/2 hp Motor HP, Cut Materials: Steel, Maximum Pipe/Tube Diameter: 8 in, Minimum Pipe/Tube Diameter: 2-1/2 in, 1 Speed, 32 rpm, On/Off Toggle Switch, 22-1/2 in L x 11-7/8 in W

• Durable displacement cutter wheel square cuts with minimal burr on 21 ft pipe of nipple lengths without and open flames or sparks
• Great for cutting pipe for groove joining
• Hydraulic foot pump helps operator control the feed rate
• Add the RIDGID Pipe Roller for pipe beveling (second operator recommended)
• Heavy-duty design perfect for use in the field or shop
• Heavy-duty design is perfect for field or shop use
• Adaptable for beveling
• Cutting Capacity: 2 1⁄2 in (65 mm) to 8 in (200 mm) schedule 10*/40 steel pipe
• Powered by a model 700 Power Drive (not included), Power Drive RPM - 26-30 (no load)

• . Product Feedback Form https://forms.office.com/r/ksqpSy17N3
• Catalog https://assets.unilogcorp.com/267/ITEM/DOC/RIDGID_38540_Catalog.pdf
• Instruction/Installation Manual https://assets.unilogcorp.com/267/ITEM/DOC/RIDGID_50767_Instruction_Installation_Manual.pdf
• Video Link https://youtu.be/JkIhwWKfAZA