Taco Comfort Solutions® RMB-1 Radiant Mixing Block, 3/4 in NPT, 120 VAC, 0 to 15.5 gpm, 1/40 hp, 1/25 hp, 3250 rpm Speed

The Taco radiant mixing block is a breakthrough in the design, control and installation of radiant systems. The RMB-1 is a complete injection mixing system, combining a variable speed injection mixing control, injection circulator, system circulator and air elimination all in a single unit.

Taco Comfort Solutions® Radiant Mixing Block, 3/4 in NPT, 120 VAC, 2 A, 0 to 15.5 gpm Flow Rate, 1/40 hp, 1/25 hp, 3250 rpm, 60 Hz, 1 ph Bronze Case, 32 to 185 deg F Fluid, 125 psi, 6-1/2 in Dia x 14 in H, 0 to 15 ft Head Range

• All-in-one injection piping, pumping, air elimination and control package
• Only 4-pipe connections required
• Plug-in low voltage connections
• Solid state microprocessor design
• Greatly decreases installation time, substantial space savings
• Bronze casing for open or closed systems, replaceable cartridge design
• Maintenance-free, wet-rotor circulators
• 2-operation modes - outdoor reset and set point with or without delta T limiting
• Powered or unpowered demand signal, integral check valve
• Main system pump contact, 100% pump operation/control override switch
• Automatic pump exercise, adjustable reset ratio
• Warm weather shutdown, boiler control or enable setting
• Boiler Protection
• Large LCD display
• Includes outdoor and (2) strap-on sensors

• Instruction/Installation Manual https://assets.unilogcorp.com/267/ITEM/DOC/Taco_Comfort_Solutions_RMB_1_Manual.pdf
• Specification Sheet https://assets.unilogcorp.com/267/ITEM/DOC/Taco_Comfort_Solutions_RMB_1_Specification_Sheet.pdf