SCHIER AK 1 Anti-Flotation Anchor Kit, Polyethylene

Interceptors and risers are not designed to withstand water table height in excess of the top of the unit when buried. If there is a possibility that ground water will come into contact with a grease interceptor or solids interceptor, the unit must be installed with an anti-flotation anchor kit. At risk areas include but are not limited to tidal surge areas, floodplains and areas that receive storm water.

SCHIER Anti-Flotation Anchor Kit, For Use With: Great Basin™️ and Billy Goat™ Legacy Models GB-50, GB-75, GB-250, SI-50, SI-75 and SI-250 Interceptors, Polyethylene, 19-1/2 in L x 21-1/4 in W x 2-1/4 in H, Additional Information: Model AK1

• This anchor kit is recommended for installation in high water table conditions to prevent float out
• Hold down force achieved by backfill weight acting on anchor plate

• Specification Sheet https://assets.unilogcorp.com/267/ITEM/DOC/SCHIER_AK1_Specification_Sheet.pdf
• Specification Sheet https://assets.unilogcorp.com/267/ITEM/DOC/SCHIER_AK1_Specification_Sheet.pdf