LEONARD® ECO-MIX™ TM-600-LF Drench Shower Valve, 3/4 x 1 in, 3 to 58 gpm, 125 psi, Bi-Metal Body, Bronze
- Manufacturer: Leonard Valve
- Brand Name: LEONARD®
- Part#: LEOTM-600-LF
- MPN: TM-600-LF
- Min. Order Qty: 1
- Qty. Interval: 1
-
Availability:
- Branch Availability
-
Price:
-
Other Branch Availability
ECO-MIX ™ DURA-trol® solid bimetal thermostat directly linked to valve porting to control the intake of hot and cold water and compensate for supply temperature and pressure fluctuations. DURA-trol® is highly responsive and cannot be damaged by extremes in temperature. Thermostatic mixing valve can be set to the correct temperature for the application. Locking type temperature regulator to prevent accidental movement set for 85 deg F, recommended hot inlet temperature 140 deg F. Mixing valve will close down on failure of cold water supply, mixing valve with special internal cold water bypass capable of 20 gpm at 30 psi upon failure of hot water supply. Adjustable high temperature limit stop set for 90 deg F, Full 3/4 in top or bottom inlets and 1 in top outlet, integral wall support, dial thermometer (range 0 to 140 deg F), rough bronze finish. Union angle checkstops on inlets to determine the amount of hot water needed to maintain a steady outlet temperature for 15 min. This product is certified to meet low-lead requirements of wetted surface area containing less than 0.25% lead by weight.
LEONARD® ECO-MIX™ Drench Shower Valve, 3/4 x 1 in Connection, 3 to 58 gpm Flow Rate, 125 psi, 180 deg F, Bi-Metal Body, Finish: Bronze, 15 in Width, For Use With: Drench or Combination Emergency Showers
| Body Material | : | Bi-Metal |
| Connection Size | : | 3/4 x 1 in |
| Finish | : | Bronze |
| Flow Rate | : | 3 to 58 gpm |
| Pressure Rating | : | 125 psi |
| Suitable For Use With | : | Drench or Combination Emergency Showers |
| Temperature Rating | : | 180 deg F |
| Width | : | 15 in |
- Controls water temperature to provide tepid water for emergency showers, eyewash and eye/face wash units
- High temperature limit stop set for 90 deg F
- Internal cold water bypass on failure of hot water supply standard on all models
- On failure of hot water supply, internal cold water bypass delivers cold water to the emergency fixture, minimum of 4 gpm at 30 psi
- ANSI/ISEA Z358.1-2014 requires water to emergency equipment to be tepid
- All systems are factory tested before shipment
- On failure of cold water supply, hot water is shut down
- Color-coded outlet dial thermometer to view temperature
- Toll-free technical support
Catalog