Pipe-with-the-Stripe® 100 Series 015301 Pipe With Green Stripe, 1/2 in Nominal Pipe, 0.62 in ID, 400 ft, SCH 40
- Manufacturer: Aliaxis Group SA
- Brand Name: Pipe-with-the-Stripe®
- Part#: POPCSA100-12-400
- MPN: 015301
- Min. Order Qty: 1
- Qty. Interval: 1
-
Availability:
- Branch Availability
-
Price:
-
Other Branch Availability
Pipe-with-the-Stripe® polyethylene piping can be used in an almost limitless range of indoor as well as outdoor applications, from water well and distribution lines, to maple sap collection, to ice skating rinks and geothermal heating systems, to name just a few. Lightweight and easy to install using compression or barbed insert fittings, IPEX® Pipe-with-the-Stripe® offers outstanding strength and flexibility along with the chemical, corrosion and UV-resistance you'd expect from polyethylene. Choose from standard or CSA certified PE, in nominal sizes from 1/2 to 3 in.
Pipe-with-the-Stripe® Pipe With Green Stripe, 100 Series, 1/2 in Nominal Pipe, 0.62 in Inside Diameter, 400 ft Length, 100 psi, SCH 40, Polyethylene, 73.4 deg F
| Inside Diameter | : | 0.62 in |
| Length | : | 400 ft |
| Material | : | Polyethylene |
| Nominal Pipe Size | : | 1/2 in |
| Pressure Rating | : | 100 psi |
| Schedule Rating | : | SCH 40 |
| Series | : | 100 Series |
| Temperature Rating | : | 73.4 deg F |
- Polyethylene Pipe-with-the-Stripe® features a permanent colored stripe which enables the class and type of pipe to be easily identified, whether in storage onsite or embedded in the ground
- In fact, the stripe is actually part of the pipe and will always be visible
- Permanent, extruded colored stripes to identify CSA or standard pressure ratings
- Colored strapping on coils to match stripe color and assist in easy identification for storage and shipping
- Sequential footage marking for easier cut measurements
- Made from low density PE resin to maintain flexibility in colder months
- Large safety factors for burst strength that is 4X for CSA and 3X for standard
Catalog