Bradford White® C-DW2-TW50T10FBN Water Heater, 45 gal, 67000 Btu/hr, Natural Gas
- Manufacturer: Bradford White Corporation
- Brand Name: Bradford White®
- Part#: BRWCDW2-TW50T10FBN
- MPN: C-DW2-TW50T10FBN
- Min. Order Qty: 1
- Qty. Interval: 1
-
Availability:
- Branch Availability
-
Price:
-
Other Branch Availability
Bradford White® Water Heater, 45 gal Capacity, 67000 Btu/hr, 72 gph Recovery Rate, 3 in Vent, Power Vent, 3.1 A, 60 Hz, NPT Connection, 150 psi, Recovery Efficiency: 80 %, Floor Mounting, Natural Gas Fuel, On/Off Switching Action, Spark to Pilot Ignition, Steel, Finish: Vitraglas Glass-Coated, 180 deg F, 65-7/8 in H x 22 in W x 26-3/4 in D, Domestic/Import: Domestic, 2500 ft Altitude
| Altitude | : | 2500 ft |
| Amperage Rating | : | 3.1 A |
| BTU Rating | : | 67000 Btu/hr |
| Capacity | : | 45 gal |
| Connection Type | : | NPT |
| Dimensions | : | 65-7/8 in H x 22 in W x 26-3/4 in D |
| Domestic/Import | : | Domestic |
| Finish | : | Vitraglas Glass-Coated |
| Frequency Rating | : | 60 Hz |
| Fuel Type | : | Natural Gas |
| Ignition Type | : | Spark to Pilot |
| Material | : | Steel |
| Mounting Type | : | Floor |
| Pressure Rating | : | 150 psi |
| Recovery Efficiency | : | 80 % |
| Recovery Rate | : | 72 gph |
| Switching Action | : | On/Off |
| Temperature Rating | : | 180 deg F |
| Vent Size | : | 3 in |
| Vent Type | : | Power |
- Advanced ScreenLok® technology flame arrestor design, flame arrestor is designed to prevent ignition of flammable vapor outside of the water heater
- Flammable vapor sensor, electronic sensor prevents burner operation if flammable vapors are detected, the sensor will also prevent operation if there is ongoing flammable vapors burning inside the combustion chamber
- Maintenance-free, regular cleaning of air inlet openings or flame arrestor is not required under normal conditions
- Sight window offers a view of the pilot and burner operation
- Internal double wall heat exchanger 1-1/2 in (38 mm) OD glass-coated (Vitraglas®) steel coil ensures separation of potable water and heating fluid
- Low heat exchanger head loss up to 8 gpm flow, with less than 6 ft of head loss, greatly reduces the required pump size for heat exchange
- Bradford White® ICON System® intelligent gas control with spark to pilot ignition system that eliminates the constant burning pilot, this results in savings of pilot gas during stand-by periods (120 VAC)
- Enhanced performance proprietary algorithms provide enhanced first hour rating and tighter temperature differential
- Advanced temperature control system, microprocessor constantly monitors and controls burner operation to maintain accurate water temperature levels
- Intelligent diagnostics an exclusive green LED light prompts the installer during start up and provides ten different diagnostic codes to assist in troubleshooting
- Factory installed Hydrojet® total performance system, sediment reducing device that also increases first hour rating of hot water while minimizing temperature buildup in tank
- Vitraglas® lining, an exclusively engineered enamel formula that provides superior tank protection from the highly corrosive effects of hot water, this formula (Vitraglas®) is fused to the steel surface by firing at a temperature of over 1600 deg F
- Horizontal and vertical venting with 3 in (76mm) or 4 in (102mm) PVC, ABS or CPVC (maximum equivalent vent lengths on reverse side)
- Insulation system 2 in (51 mm) non-cfc foam insulation covers the sides and top of the tank, reducing heat loss, this results in less energy consumption, improved efficiencies and jacket rigidity
- Pedestal base
- Water connections - 3/4 in (19 mm) NPT factory installed true dielectric fittings extend water heater life and simplify water line connections
- Two protective anode rods
- Temperature and pressure relief valves relief valve installed
- Low restrictive brass drain valve durable tamper-proof design
Specification Sheet