Sioux Chief StrongArm™ 525-1613R Twisted Bracket With (1) Lock Block™ 3/4 in Flame-Rated CTS Tube Clamp, 17-1/4 in L

Sioux Chief 525 Series Strong Arm™ with Lock Block™ bracketing system shall be used where necessary for securing CTS stub-outs when penetrating a wall. Bracket shall be corrosion-resistant with twisted ends to mount to the surface of a wood or metal stud wall. System shall include approved hardware. System shall include slideable, plastic block device to position and secure CTS stub-out at any desired location within the stud cavity. When screws on blocks are tightened, compression of blocks prevents lateral movement on brackets and simultaneously compresses on tube to prevent stub-out movement. Lock Block™ shall be compatible with copper, CPVC or PEX tube. System shall be IAPMO listed.

Sioux Chief StrongArm™ Twisted Bracket, 525 Series, 25 lb Weight, 7/8 in Maximum Pipe Diameter, Steel, Finish: Galvanized, 5/8 in Thickness, 17-1/4 in Length, 7/8 in Width, 1-3/4 in Height, Additional Information: For Use With 16 in Stud Bays

• Rigidly secures any 1/2 to 1 in CTS stub-out and prevents all movement
• Twisted brackets easily mount to the face of the stud and L-bent brackets mount inside the stud cavity
• Lock Block™ compress on tube and brackets after screws are tightened
• Lock Block™ are pre-assembled on each pair of brackets
• UL 94 V-0 flame-rated Lock Block™ are red for easy inspection and identification when flame ratings are specified

• Catalog https://assets.unilogcorp.com/267/ITEM/DOC/Sioux_Chief_5251613R_Catalog.pdf
• Instruction/Installation Manual https://assets.unilogcorp.com/267/ITEM/DOC/Sioux_Chief_5251613R_Instruction_Installation_Manual.pdf
• Specification Sheet https://assets.unilogcorp.com/267/ITEM/DOC/Sioux_Chief_5251613R_Specification_Sheet.pdf
• Video Link https://youtu.be/og7wXIPcBik