Mission™ BAND-SEAL® 0705020 End Cap, 5 in, For Use With: Capping Cast Iron, Plastic or Steel Pipe Ends, Rubber
- Manufacturer: Mission Rubber Company
- Brand Name: Mission™
- Part#: MRBEC-5
- MPN: 0705020
- UPC: 016846070206
- Min. Order Qty: 1
- Qty. Interval: 1
-
Availability:
- Branch Availability
-
Price:
-
Other Branch Availability
Flexible, rubber end caps for capping Cast Iron, Plastic, or Steel pipe ends. Non-pressure, gravity flow applications only. Recommended for above ground installations. Easy to install and reuse.
Mission™ BAND-SEAL® End Cap, 5 in Fitting, 1000 psi Tensile Strength, For Use With: Capping Cast Iron, Plastic or Steel Pipe Ends, Material Standard: ASTM C425, Rubber, 5.35 in OD, Additional Information: 5/16 in Hex Screw
| Additional Information | : | 5/16 in Hex Screw |
| Connection Size | : | 5 in |
| Dimensions | : | 5.35 in OD |
| Fitting Size | : | 5 in |
| Fitting Type | : | Cap |
| Material Construction | : | Rubber |
| Material Standard | : | ASTM C425 |
| Material | : | Rubber |
| Suitable For Use With | : | Capping Cast Iron, Plastic or Steel Pipe Ends |
| Tensile Strength | : | 1000 psi |
- Leak proof increased band tension secures pipe end, forming a watertight seal, strong, molded "ASTERISK" braces end cap against head pressure during testing
- Stainless steel components resist corrosion in a variety of environments
- Secure tight fitting internal cone creates wedge inside pipe, balancing outward strains against steel clamp, sealing O-rings under clamp prevent pipe end slippage for a reinforced joint seal
- Durable molded, synthetic rubber cap resists UV rays, ozone, fungus growth, natural soil erosive properties and normal sewer gases, so strong it doesn't need the usual reinforcing plastic disk or liner
- Perfect protection against entry of dirt into pipe
- Resilient synthetic rubbers permit considerable distortion withstanding tension and compression, more pliable and easier to install in cold weather applications than an elastomeric PVC cap
- Reusable so easy-to-install and reuse that it makes an ideal permanent clean-out
- Adaptable, for permanent or temporary clean outs, independent clamp tightening adapts to different outside pipe diameters
- Listed by IAPMO for "permanent clean out" applications
- Pre-set calibration all Band-Seal® end caps are designed to be installed with a pre-set torque wrench calibrated to 60 in-lb maximum to accommodate the 300 Series stainless steel 5⁄16 in hex head screw
Specification Sheet