Westlake Pipe & Fittings P1209 Adapter Sleeve, 6 in Weld Spigot x 6 in Weld Sewer Hub, PVC, White, SDR 35

1-1/2 in through 12 in injection molded solvent weld drain, waste and vent (DWV) fittings shall be manufactured in accordance with ASTM D2665, F1866, F2135 and CSA B181.2, as applicable. Injection molded solvent weld DWV fittings shall be certified by the national sanitation foundation (NSF) to meet ASTM D2665 and ASTM F2135, as applicable and by the Canadian standards Association (CSA) to meet CSA B181.2 as applicable. They shall be certified by the international Association of plumbing and municipal Officials (IAPMO) to meet the requirements of the uniform plumbing code (UPC), as applicable. 1-1/2 in through 12 in injection molded solvent weld drain, waste and vent (DWV) fittings shall be manufactured from PVC with cell class of 12454 in accordance with ASTM D1784.

Westlake Pipe & Fittings Adapter Sleeve, Sleeve Fitting, 6 in Connection Size 1, Connection Type 1: Weld Spigot, 6 in Connection Size 2, Connection Type 2: Weld Sewer Hub, Spigot|Hub Connection, PVC, Material Construction: Molded PVC, White, SDR 35, 7.03125 in OD x 3.21 in W x 7.04 in D x 3.03 in H

• Our solvent weld DWV molded fittings are third party tested and listed by NSF, UPC and CSA to meet specifications defined in ASTM D2665, ASTM F2135 and CSA B181.2, where applicable
• Fabricated fittings conform to ASTM F1866

• Specification Sheet https://assets.unilogcorp.com/267/ITEM/DOC/NAPCO_P1209_Specification_Sheet.pdf