Mueller Steam Specialty™ 101MAT Series 101MAT-5 Standard Wafer Silent Check Valve, 5 in, Lead-Free, Iron
- Manufacturer: Watts Water Technologies
- Brand Name: Mueller Steam Specialty™
- Part#: MUE101MAT-5
- MPN: 101MAT-5
- Min. Order Qty: 1
- Qty. Interval: 1
-
Availability:
- Branch Availability
-
Price:
-
Other Branch Availability
Series 101MAT class 125 cast iron standard wafer silent check valves are designed for liquids and gases where flow reversal can cause surge and water hammer. Used extensively in pump suction and discharge.
Mueller Steam Specialty™ Standard Wafer Silent Check Valve, 101MAT Series, 5 in Nominal, 200 psi, Pressure Class: 125 lb, 150 deg F, Gas, Liquid Media, 6 in Inlet to Outlet Length, Iron Body, Stainless Steel Seat, Stainless Steel Disc, 302 Stainless Steel Trim, Lead-Free, 10 in H
| Body Material | : | Iron |
| Dimensions | : | 10 in H |
| Disc Material | : | Stainless Steel |
| Inlet to Outlet Length | : | 6 in |
| Lead-Free/Contains Lead | : | Lead-Free |
| Media | : | Gas, Liquid |
| Nominal Size | : | 5 in |
| Plumbing and Flow Control | : | Plumbing and Flow Control |
| Pressure Class | : | 125 lb |
| Pressure Rating | : | 200 psi |
| Seat Material | : | Stainless Steel |
| Series | : | 101MAT Series |
| Temperature Rating | : | 150 deg F |
| Trim Material | : | 302 Stainless Steel |
- Disc is fully guided at top and bottom to ensure alignment and sealing at any installation angle
- Compact, lightweight wafer design saves space
- Disc begins to open at 0.5 psi (34.5 kPa) and opens 1/3 in per inch of line size for enhanced flow
- Spring closes the disc before flow reversal, preventing surge and water hammer
- Mating surfaces of the disc and seat are hand lapped for best possible sealing
- Bodies are designed to accommodate 110% flow of equivalent pipe size
- Designed to fit within ANSI bolt circles
Specification Sheet