Liberty Pumps® ELV280HV Elevator Sump Pump System With OilTector® Control, 208 - 230 V, 1 ph-Phase, 1/2 hp

The ELV series sump pumps are designed and approved for safe operation of pumping, alarming and monitoring of elevator sump pits, transformer vaults and other applications where oil and water must be detected. The OilTector® system will activate the pump to remove water from elevator pits in accordance with ASME A17.1 and will provide pumping of only water-even if an oil condition is detected. The OilTector® cycles the pump only in the water range. Oil and other harmful floating substances are not discharged into the environment. An alarm is activated in the event of a high water condition or high oil condition.

Liberty Pumps® Elevator Sump Pump System, 208- 230 V, 12.5 A, 60 Hz, 1 ph Phase, 1/2 hp, 1-1/2 in Outlet, Ball Float Type, Thermal Pump Switch, 25 ft Cord Length, Plug-In Electrical Connection, Polymer Impeller, Clamp Mounting, NEMA 4X Enclosure, 10 in H x 7-1/2 in W x 5-1/2 in D, Domestic/Import: Domestic, Additional Information: 1-1/2 in FNPT Discharge

• Oil-resistant SJEOOW cord, 25 ft standard length
• Easy clamp-mounted pre-set level sensor holder
• No field adjustments required
• OilTector® will turn pumps on and off, sound the high water alarm and high oil alarm with one easy installation
• See through door, separate pump and control circuits NEMA 4X enclosure
• Plug-in ready pump cord and control panel cord for quick and easy installation
• Remote alarm with auxiliary contacts for connection to building automation or SCADA system, 24 V/DC, 500 mA max switching
• Power ON, pump run, high water and high oil lights

• Instruction/Installation Manual https://assets.unilogcorp.com/267/ITEM/DOC/Liberty_Pumps_ELV280_5_Instruction_Installation_Manual.pdf
• Specification Sheet https://assets.unilogcorp.com/267/ITEM/DOC/Liberty_Pumps_ELV280_5_Specification_Sheet.pdf
• Video Link https://youtu.be/Q4w1nONJf48