Tekmar® 003 Relay, 2-3/8 in L, 1-9/16 in W, 3 in H

The relay 003 is a 24 VAC coil DPDT (double pole double throw) relay that is used to isolate electrical loads and allow higher current ratings than the on board relays found on tekmar controls. It can be used in applications ranging from doubling the capability of a single output (e.g. energize a pump as well as provide a boiler demand from one output) to allowing a pump to be used that draws more than the control's specified relay rating. This product uses a 24 VAC coil that once energized, closes 2 normally open contacts and opens 2 normally closed contacts.

Tekmar® Relay, 2-3/8 in Length, 1-9/16 in Width, 3 in Height, 24 VAC, -40 to 140 deg F

• LED to indicate when energized
• Isolate electrical loads
• Test tab for easy test and manual override
• Easy-to-replace (ice cube style - no need to remove wiring)
• Double pole double throw relay

• Instruction/Installation Manual https://assets.unilogcorp.com/267/ITEM/DOC/Tekmar_003_Instruction_Installation_Manual.pdf
• Warranty Information https://assets.unilogcorp.com/267/ITEM/DOC/Tekmar_003_Warranty_Information.pdf