Grundfos MAGNA 1 Series MAGNA1 32-60 F 98126819 Circulator Pump, 34.2 gpm, 8.71 to 107 W, 115-230 V, 0.28 to 1.01 A
- Manufacturer: Grundfos
- Brand Name: Grundfos
- Part#: GRU98126819
- MPN: 98126819
- Min. Order Qty: 1
- Qty. Interval: 1
-
Availability:
- Branch Availability
-
Price:
-
Other Branch Availability
MAGNA1 circulator pump with easy selection of pump setting the pump is of the canned rotor type, that is pump and motor form an integral unit without shaft seal and with only Two-gaskets for sealing. The bearings are lubricated by the pumped liquid. In order to avoid problems in connection with disposal, great importance has been attached to using as few different materials as possible. A pump with no maintenance requirements and extremely low life cycle cost. The MAGNA1 circulator pumps are designed for circulating liquids in heating systems with variable flows where it is desirable to optimise the setting of the pump-duty point, thus reducing energy costs. The pumps are also suitable for domestic hot water systems. To ensure correct operation, it is important that the sizing range of the system falls within the duty range of the pump.
Grundfos Circulator Pump, MAGNA 1 Series, Model: MAGNA1 32-60 F, 34.2 gpm Flow Rate, 60 mm Inlet, 60 mm Outlet, 19.69 ft Maximum Head, 8.71 to 107 W, 115-230 V, 0.28 to 1.01 A, 60 Hz, 175 psi Maximum Pressure, 3516 rpm Motor Speed Rating, GF15/26/40/43 Connection, Flanged Connection, 1 ph Phase, 4 Poles, 104 deg F Ambient, 230 deg F Liquid, Iron, 6.61 in H x 7.91 in W, Additional Information: Glass-Filled PES Impeller Material
| Additional Information | : | Glass-Filled PES Impeller Material |
| Amperage Rating | : | 0.28 to 1.01 A |
| Body Material | : | Iron |
| Connection Size | : | GF15/26/40/43 |
| Connection Type | : | Flanged |
| Dimensions | : | 6.61 in H x 7.91 in W |
| Discharge Size | : | 60 mm Dia |
| Flow Rate | : | 34.2 gpm |
| Frequency Rating | : | 60 Hz |
| Impeller Material | : | 30% Glass-Filled PES |
| Inlet Size | : | 60 mm |
| Material | : | Iron |
| Maximum Head | : | 19.69 ft |
| Maximum Pressure | : | 175 psi |
| Model | : | MAGNA1 32-60 F |
| Motor Speed Rating | : | 3516 rpm |
| Number of Poles | : | 4 |
| Outlet Size | : | 60 mm |
| Phase | : | 1 ph |
| Power Rating | : | 8.71 to 107 W |
| Pressure Rating | : | 175 psi |
| Series | : | MAGNA 1 Series |
| Suction Size | : | 60 mm Dia |
| Temperature Rating | : | 104 deg F Ambient, 230 deg F Liquid |
| Voltage Rating | : | 115-230 V |
- Safe selection
- Simple installation
- Low energy consumption
- Nine light fields for indication of pump setting, three-proportional-pressure curves, three-constant-pressure curves and three-fixed-speed curves are available
- Low noise level
- No maintenance and long life
- Multiple pump control modes including patented auto adapt
- Intelligent interface pump display
- No mechanical seal and no coupler
- Proportional pressure control
- Constant pressure control
- Constant curve/constant speed-duty
- Wide temperature range where the liquid temperature and the ambient temperature are independent of each other
Catalog