Honeywell L6081A1010/U Aquastat Control, SPDT (Low), SPST (High), Horizontal Mounting, 10 deg F Fixed Differential

Honeywell Aquastat Control, 200 psi on Immersion Well, 100 psi Direct Immersion, 3/4-14 NPT Well Spud, Quick Connect/Push-In, mV: 0.25 A at 0.25 to 12 VDC, Full Load: 8 A at 120 VAC, 5.1 A at 240 VAC, Locked Rotor: 48 A at 120 VAC, 30.6 A at 240 VAC Contact, SPDT (Low), SPST (High), Liquid Filled Bulb Sensing Element, Horizontal Mount, 110 to 220 deg F Low, 130 to 240 deg F High Limit, 150 deg F Maximum at Switches, 265 deg F at Sensing Element, 10 deg F Fixed Differential, 0 to 95% RH Non-Condensing Humidity, 4-1/8 in W x 3-7/8 in H x 2-3/4 in D

• An immersion type liquid-filled sensing element actuates (2) snap switches
• (1) switch operates as a high limit control
• The other switch operates as a low limit and/or circulator control, depending on the model
• Controller may be-mounted in any positioning and needs no leveling
• Separate, easy-to-read, calibrated dial and setpoint adjustments for each switch
• Differential adjustment on low limit or circulator switch
• All adjustments accessible inside front cover
• Push-in terminals for quick connecting
• 1-sensing element for easy installation
• (1) SPST and SPDT snap switches act independently at respective temperature settings
• Includes 3 in insertion well
• 3 in D insulation
• 360 V-A transformer load ignition electrical ratings
• High limit, low limit and/or circulator controllers used to regulate boiler water temperature in gas- or oil-fired hydronic heating systems

• Instruction/Installation Manual https://assets.unilogcorp.com/267/ITEM/DOC/Honeywell_L6081A1010_U_Manual.pdf
• Specification Sheet https://assets.unilogcorp.com/267/ITEM/DOC/Honeywell_L4081A1023_U_Specification_Sheet.pdf