SALUS® AKL06PRF Wireless Pump Relay Controller, 6-Zone, 20 A, ABS

The SALUS® AKL06PRF wireless pump relay controller connects up to six zones providing heat to each circuit based on signals from SALUS® wireless thermostats. Optional zone 1 priority may be used in conjunction with a wired domestic hot water storage tank thermostat or other critical zone to give demand precedence to this zone above others. Optional pump exercising prevents the circulators from seizing during long periods of inactivity. Pump purge is another optional feature that improves the system efficiency by continuing to run the priority pump for 2 minutes after the zone 1 demand is satisfied. The unique SALUS® wireless system allows remote monitoring via internet connection.

SALUS® Wireless Pump Relay Controller, 20 A, 120 VAC, 1/6 hp, 6 Zones, ABS, 32 to 110 deg F, 3.15 x 11 x 9.25 in

• Primary pump control
• Priority zone support (domestic hot water)
• Purge priority pump continues to run for 2 mins after end of priority call
• Exercise pumps turn ON for 30 s after 72 hr of inactivity
• Thermostat grouping
• ZC/ZR boiler enable support
• Wireless boiler XX support with a zigbee receiver (AX10RF)
• XX and AUX normally open contacts support
• Master/slave function for up to five units (1 master/4 slaves)
• External antenna for sheltered locations
• LED indicators for zones and priority status

• Instruction/Installation Manual https://assets.unilogcorp.com/267/ITEM/DOC/SALUS_AKL06PRF_Instruction_Installation_Manual.pdf
• Specification Sheet https://assets.unilogcorp.com/267/ITEM/DOC/SALUS_AKL01PRF_Specification_Sheet.pdf