AXIOM SF100-HP Hydronic System Feeder, 25 to 85 psi, 208 L Capacity, 115 VAC

The SF100-HP contains everything required to feed and pressurize closed hydronic heating or cooling systems in a neat, simple package that is easy-to-install and operate. It is compatible with both water and water/glycol solutions.

AXIOM Hydronic System Feeder, 115 VAC, 60 Hz, 1 ph Phase, 25 to 85 psi, 1.5 gpm Flow Rate, 208 L Capacity, 49 in H x 24 in W

• 208 L tank for storage and mixing
• Plugs into any standard 115 VAC outlet
• Fluid level switch shuts the pump-off if the storage tank level gets low
• Accumulator tank prevents excessive pump cycling
• No direct connection to potable water supply eliminates need for backflow prevention
• Make-up fluid stored in the feeder tank can be pre-treated to meet appliance manufacturers specifications
• Diverter valve for purging of air on initial start-up and manual agitation of solution
• Prevents major floods - in the event of system rupture, only the contents of the tank will be pumped into the system
• Dropping fluid level provides immediate notice that the system has developed a leak
• Fluid drained for service can easily be put back into the system
• Flexible connection hose with system check valve makes installation easy

• Catalog https://assets.unilogcorp.com/267/ITEM/DOC/Axiom_NT70_Catalog.pdf
• Specification Sheet https://assets.unilogcorp.com/267/ITEM/DOC/Axiom_SF100_HP_Specification_Sheet.pdf