FAST-STAT 5000 Wiring Extender, 24 VAC, 2 A

FAST-STAT Wiring Extender, 24 VAC, 2 A, Adhesive Tape, Screw Mounting, Plastic, Black, -20 to 120 deg F

• Fast-Stat wiring extenders electronically add more wires to a control cable
• Saves significant time and expense as compared to repulling of new cables
• Causes no damage to walls or ceilings as compared to access holes that are often needed when re-pulling cables
• The sender and receiver communicate over the existing thermostat cable and/or outdoor unit cable
• Not a wireless system and therefore avoids all the problems that wireless systems may have
• No batteries required, all Fast-Stat models are powered by the existing 24 V transformer
• Works over long cable lengths up to 500 ft and more
• Fast-Stat wiring extenders do not produce interference with other electronic devices nor are they affected electronic devices that produce large amounts of interference
• Low power use, most FAST-STAT models use less than 3 W of power
• Compatible with all conventional wiring systems using R, C, W, W2, Y, Y2, G, O/B and other terminals
• Can be used with oil burners, zone controllers and other systems that require "dry contact switching"
• Many Fast-Stat wiring extenders can be used in the same building or complex without interference between units
• Works with old and new systems, can be connected to older systems such as thermopile milli V, standing pilot systems, intermittent pilot controllers, fan centers and more
• R, C, W1, W2, Y, G terminal designations
• Adds 4-wire to any system, two-stage heat, 1 cool, powered stats, cable repairs

• Instruction/Installation Manual https://assets.unilogcorp.com/267/ITEM/DOC/Fast_Stat_5000_Manual.pdf
• `Product Feedback Form https://forms.office.com/r/ksqpSy17N3
• Instruction/Installation Manual https://assets.unilogcorp.com/267/ITEM/DOC/Fast_Stat_5000_Manual.pdf