Honeywell Modutrol IV 72 Series M7285A1003/U Damper Actuator, 120 VAC, 7.2 A Full Load, 43.2 A Locked Rotor, 18 W
- Manufacturer: Honeywell International Inc
- Brand Name: Honeywell
- Part#: HNWM7285A1003/U
- MPN: M7285A1003/U
- Min. Order Qty: 1
- Qty. Interval: 1
-
Availability:
- Branch Availability
-
Price:
-
Other Branch Availability
Honeywell Modutrol IV 72 Series Damper Actuator, Model: M7285, 7.2 A Full Load, 43.2 A Locked Rotor, 120 VAC, 50/60 Hz Frequency, 18 W Power, VA Rating: 20 VA, Electrical Connection: Screw Terminal, 30 to 60 s Timing, Die Cast Aluminum, 60 in-lb Torque, 100 Ohm at 4 to 20 mA Input, 400 kOhm at 2 to 10 VDC Input Input, -40 to 150 deg F, NEMA 3 Enclosure, Dimensions: 6-7/16 in H x 5-1/2 in W x 8-3/4 in D, Control Signal: Modulating, Auxiliary Switch Control, Foot Mounting, 90 to 160 deg Rotation, Shaft Design: Square, Clockwise Shaft Rotation, 3/8 in Shaft, Adjustable, Asymmetrical Stroke
| Amperage Rating | : | 7.2 A Full Load, 43.2 A Locked Rotor |
| Control Signal | : | Modulating |
| Control Type | : | Auxiliary Switch |
| Dimensions | : | 6-7/16 in H x 5-1/2 in W x 8-3/4 in D |
| Electrical Connection | : | Screw Terminal |
| Enclosure Type | : | NEMA 3 |
| Frequency Rating | : | 50/60 Hz |
| Input Impedance | : | 100 Ohm at 4 to 20 mA Input, 400 kOhm at 2 to 10 VDC Input |
| Material | : | Die Cast Aluminum |
| Model | : | M7285 |
| Mounting Type | : | Foot |
| Power Rating | : | 18 W |
| Rotation Angle | : | 90 to 160 deg |
| Series | : | 72 Series |
| Shaft Design | : | Square |
| Shaft Rotation | : | Clockwise |
| Shaft Size | : | 3/8 in |
| Stroke | : | Adjustable, Asymmetrical |
| Temperature Rating | : | -40 to 150 deg F |
| Timing Range | : | 30 to 60 s |
| Torque Rating | : | 60 in-lb |
| VA Rating | : | 20 VA |
| Voltage Rating | : | 120 VAC |
- Integral spring return returns motor to normal position when power is interrupted
- Integral junction box provides NEMA 3 weather protection
- Motor and circuitry operate from 24 VAC
- Quick-connect terminals are standard
- Adapter bracket for matching shaft height of older motors is available
- Most motors have field adjustable stroke (90 to 160 deg)
- Integral auxiliary switches are available factory mounted or can be field added
- Nominal timing standard of 30 s (90 deg stroke) and 60 s (160 deg stroke)
- Spring return motors can operate valve linkages from power end or auxiliary end shafts for normally closed or normally open valve applications
- All models have dual shafts (slotted and tapped on both ends)
- All models have auxiliary switch cams
- Fixed torque throughout the entire voltage range
- Motors are designed for either normally open or normally closed valves and dampers
Catalog