ADP® HH Series HH59136A265A2102AP Bi-Directional Airflow Evaporator Coil, Cased H Coil, 2.5 to 4 ton, 36 MBtu/hr, Copper

ADP® evaporator coils are designed for use with AC condensing units or heat pump units. These instructions are intended as a general guide and do not supersede local codes in any way. Consult with local authorities having jurisdiction before installation. Check coil for shipping damage and verify the contents of the box containing the evaporator coil. If you should find damage, immediately contact the last carrier. Verify the efficiency performance requirements, such as SEER, EER and/or HSPF are appropriate with the matched condensing or heat pump units. Check outdoor unit manufacturer for proper line sizing. Coils are shipped with a 10 psi dry air holding charge. Puncture rubber plug on suction line to release charge before removing plugs. The absence of pressure does not verify a leak. Check the coil for leaks before installing or returning it to your wholesaler. Position the coil on the outlet of the furnace using sheet metal screws. In horizontal installations, the coil should be pitched approximately 1/2 in toward the drain connections.

ADP® Bi-Directional Airflow Evaporator Coil, Series: HH Series, 36 MBtu/hr, Horizontal, 600 to 1600 cfm CFM Rating, 2.5 to 4 ton, R-410A, Cased H Coil, 3/8 in, 7/8 in, ODF, #67 Piston Size, 500 psi, 60 to 115 deg F, Copper, Embossed, 22-3/4 in H x 31 in W x 10 in D, For Use With: R-22, R-410A Refrigerants, AC Heat Pumps

• High efficiency lanced fin design
• All coils have durable packaging with bar coded labels on the box
• Threaded expansion valves available factory installed or as a field installed kit
• Coils are air pressure tested at 500 psi, leak tested with helium, sealed with rubber plugs, then charged with dry air
• Piston options include externally accessible body for easy piston change out and/or TXV installation
• Liquid line refrigerant connections are 3/8 in ODF
• Suction line refrigerant connections are 7/8 in ODF
• Microban® anti-microbial additive to inhibit the growth of mold and mildew in the drain pan
• UV-resistant drain pans are molded of high temperature (450 deg F) engineered polymer
• Non-captive refrigerant lines with long stubs make for easy installation
• Copper distributor tube assembly provides brass to brass threads for trouble-free service of TXV
• Corrosion-resistant coil header plates
• H57 slab number

• Instruction/Installation Manual https://assets.unilogcorp.com/267/ITEM/DOC/ADP_HH57118A185A2102AP_Instruction_Installation_Manual.pdf
• Specification Sheet https://assets.unilogcorp.com/267/ITEM/DOC/ADP_HH57118A185A2102AP_Specification_Sheet.pdf
• Warranty Information https://assets.unilogcorp.com/267/ITEM/DOC/ADP_HE31230A130A0000AP_Warranty.pdf