Fairview PF-75901 Mechanical End Riser, 1-1/4 in, IPS x IPS Coupling, 24 in, 250 psi, Polyethylene
- Manufacturer: Fairview Fittings & Manufacturing
- Brand Name: Fairview
- Part#: FRVPF-75901
- MPN: PF-75901
- Min. Order Qty: 1
- Qty. Interval: 1
-
Availability:
- Branch Availability
-
Price:
-
Other Branch Availability
Perfection risers provide extra safety due to the strong schedule 40 steel pipe used as the outside casing. Due to the factory installed epoxy coating the risers do not require cathodic protection devices to ward off underground corrosion. Each riser is tested to withstand a minimum of 150 psi and meet D.O.T. regulation 192 for residential and commercial L.P. or natural gas service. The above ground portion has an N.P.T. end for convenient connections to a fitting, meter or regulator. There is a unique pressure seal which locks the PE tube/pipe on the inside of the riser giving the strength to allow a pull to destruction test.
Fairview Mechanical End Riser, 1-1/4 in Connection, IPS x IPS Coupling Connection, 24 in Length, 250 psi, Material Standard: ASTM D2513, Polyethylene, 176 deg F, 30 in W
| Connection Size | : | 1-1/4 in |
| Connection Type | : | IPS x IPS Coupling |
| Dimensions | : | 30 in W |
| Length | : | 24 in |
| Material Standard | : | ASTM D2513 |
| Material | : | Polyethylene |
| Pressure Rating | : | 250 psi |
| Temperature Rating | : | 176 deg F |
- Thrust washer provides even distribution of force on the collet
- Support ring - stainless steel ring molded into body of coupling for added strength and support of the gripping collet
- Zinc-plated stiffener guarantees proper alignment and adds support
- Moisture seal - prevents entry of dust, dirt and moisture
- Collet - tapered gripping collet prevents pull-out
- O-rings - Buna-N elastomer seals provide permanent leak-proof protection
- Spacer retainer ring - guarantees precise centering of pipe and increases the locking power of collet
Catalog