Easy Radiant Works The Spartan SH-85-30 Radiant Tube Heater, 120 V, 1-Stage, Steel
- Manufacturer: EASY RADIANT WORKS
- Brand Name: Easy Radiant Works
- Part#: ESRSH-85-30
- MPN: SH-85-30
- Min. Order Qty: 1
- Qty. Interval: 1
-
Availability:
- Branch Availability
-
Price:
-
Other Branch Availability
The perfect economical option for your commercial or industrial space, larger shops and garages, and more! Enjoy the most comfortable, cost effective, and fuel efficient source of heat available with the Spartan Radiant Tube Heater.
Easy Radiant Works Radiant Tube Heater, SH Series, 120 V, 1 A, 60 Hz, 1 ph Phase, 1-Stage, Steel, 31 ft 5 in L, 60000 to 85000 Btu/hr, Additional Information: High Efficiency, Straight Configuration, 1/2 in NPT Gas Connection
| Additional Information | : | High Efficiency, Straight Configuration, 1/2 in NPT Gas Connection |
| Amperage Rating | : | 1 A |
| BTU Rating | : | 60000 to 85000 Btu/hr |
| Dimensions | : | 31 ft 5 in L |
| Frequency Rating | : | 60 Hz |
| Material | : | Steel |
| Number of Stages | : | 1 |
| Phase | : | 1 ph |
| Series | : | SH Series |
| Voltage Rating | : | 120 V |
- Burners from 60,000 to 200,000 BTUH, in lengths from 12' to 72'.
- Straight runs, U models, and custom configurations available with the use of 90 and 180 degree elbow kits.
- Single and two stage models available.
- Natural gas and propane fired models built to order with no field conversions required.
- Reliable electronic hot surface ignition.
- Built with 100% North American made electronic controls.
- Continuous combustion monitoring with three to five ignition trials before 100% safety lockout.
- Totally enclosed blower motor with internal thermal overload protection. Blower motor is externally mounted for ease of accessibility and to simplify intake air connection (4" combustion air intake duct adapter comes standard).
- Dual air proving switches monitor combustion air and exhaust airflow for safety.
- Flame observation port to visually observe combustion.
- Factory ready to accept either 24V or 120V controls.
- Emitter tubes are 4" diameter, 16 gauge North American steel.
- Primary combustion tube made of high temperature, high emissivity specialty alloy.
- Secondary tubes constructed of 16 gauge carbon steel for high emissivity.
- Swedged tube for ease of installation - no couplers or clamps required at joints.
- Emitter tubes provided with a 20 year burnout guarantee.
- Highly efficient, wide angled aluminum reflectors - engineered to reflect maximum radiant energy over the largest effective area possible.
- Highly polished material for increased reflectivity.
- Steel hangers with suspension points for both flat and angle mounting of reflectors.
- Side reflectors and arena reflectors available.
Instruction/Installation Manual