Easy Radiant Works EZ Duzzit ED-40U Infrared Radiant Tube Heater, 120 V, Steel, Black-Coated
- Manufacturer: EASY RADIANT WORKS
- Brand Name: Easy Radiant Works
- Part#: ESRED-40-U
- MPN: ED-40U
- Min. Order Qty: 1
- Qty. Interval: 1
-
Availability:
- Branch Availability
-
Price:
-
Other Branch Availability
Enjoy the luxury of comfortable, quiet, efficient radiant heat in your residential garage, home hobbyist shop, backyard auto shop, or man cave.
Easy Radiant Works Infrared Radiant Tube Heater, 120 V, 1 A, 60 Hz, 1 ph Phase, Steel, Finish: Black-Coated, 12 ft L, 40000 Btu/hr, Additional Information: U Configuration
| Additional Information | : | U Configuration |
| Amperage Rating | : | 1 A |
| BTU Rating | : | 40000 Btu/hr |
| Dimensions | : | 12 ft L |
| Finish | : | Black-Coated |
| Frequency Rating | : | 60 Hz |
| Material | : | Steel |
| Phase | : | 1 ph |
| Voltage Rating | : | 120 V |
- 40,000 BTUH in 12' U (model ED-40-U), 22' straight (model ED-40-S), and 10' x 10' “L” (model ED-40-S with 90 degree elbow) configurations.
- Natural Gas and Propane models built to order - no field conversions required.
- Install as low as 7' from the floor.
- Comes standard with hanging chain, flexible gas connector, 24V thermostat, and side wall exhaust termination in the box
- Full 4 year bumper to bumper guarantee.
- Reliable electronic hot surface ignition.
- Built with 100% North American made electronic controls.
- Continuous combustion monitoring with three to five ignition trials before 100% safety lockout.
- Totally enclosed blower motor with internal thermal overload protection. Blower motor is externally mounted for ease of accessibility and to simplify intake air connection (4" combustion air intake duct adapter comes standard).
- Dual air proving switches monitor combustion air and exhaust airflow for safety.
- Flame observation port to visually observe combustion.
- Factory ready to accept either 24V or 120V controls.
- Emitter tubes are 3.5" diameter, 16 gauge North American steel.
- Primary combustion tube made of high temperature, high emissivity specialty alloy.
- Secondary tubes constructed of 16 gauge carbon steel for high emissivity.
- Swedged tube for ease of installation - no couplers or clamps required at joints.
- Emitter tubes provided with a 20 year burnout guarantee.
- Highly efficient, wide angled aluminum reflectors - engineered to reflect maximum radiant energy over the largest effective area possible.
- Highly polished material for increased reflectivity.
- Steel hangers with suspension points for both flat and angle mounting of reflectors.
Instruction/Installation Manual
Video Link