MASTERS® A-Plus® MAP250 Anaerobic Pipe Thread Sealant, Paste, White, Mild, 250 mL, Tube
- Manufacturer: Oatey
- Brand Name: MASTERS®
- Part#: GFTMAP250
- MPN: MAP250
- UPC: 067001001672
- Min. Order Qty: 1
- Qty. Interval: 1
-
Availability:
- Branch Availability
-
Price:
-
Other Branch Availability
MASTERS® A-Plus® is a general purpose anaerobic pipe thread sealant. It has superior sealing and locking properties compared to tapes and non-hardening pastes.
MASTERS® A-Plus® Anaerobic Pipe Thread Sealant, 250 mL Net Content, Tube Container, Composition: Polyethylene Glycol DimethAcrylate, Polymeric Plasticizer, Unsaturated Polyester Resin, Polytetrafluoroethylene, Poly(ethylene) Homopolymer, Titanium Dioxide, Silicon Dioxide, Amorphous, Fumed, Crystalline-Free, Cumene Hydroperoxide, Paste Form, White, Mild Odor/Scent, 1.16 Specific Gravity, >300 deg F Boiling Point, 200 deg F Flash Point, <10 mmHg Vapor Pressure, 1.4 g/L VOC, 250 psi, Applicable Materials: Aluminum, Black Iron, Brass, Copper, Stainless Steel, Slightly Soluble in Water, -65 to 400 deg F
| Applicable Materials | : | Aluminum, Black Iron, Brass, Copper, Stainless Steel |
| Boiling Point | : | >300 deg F |
| Color | : | White |
| Composition | : | Polyethylene Glycol DimethAcrylate, Polymeric Plasticizer, Unsaturated Polyester Resin, Polytetrafluoroethylene, Poly(ethylene) Homopolymer, Titanium Dioxide, Silicon Dioxide, Amorphous, Fumed, Crystalline-Free, Cumene Hydroperoxide |
| Container Type | : | Tube |
| Flash Point | : | 200 deg F |
| Form | : | Paste |
| Net Content | : | 250 mL |
| Odor/Scent | : | Mild |
| Pressure Rating | : | 250 psi |
| Solubility | : | Slightly Soluble in Water |
| Specific Gravity | : | 1.16 |
| Temperature Rating | : | -65 to 400 deg F |
| VOC Content | : | 1.4 g/L |
| Vapor Pressure | : | <10 mmHg |
- Excellent performance on stainless steel pipe and is commonly used where vibrations are prevalent, making it suitable for production line applications
- Seals to moderate pressure almost instantly and to 250 psi in approximately 24 hr
- Once curing is complete, it can withstand temperatures from -65 to 400 deg F
- Lubricates during assembly and hardens in the threads
Instruction/Installation Manual