Caleffi DIRTMAG® 546367A Dirt Separator With Magnet, 1-1/4 in, Press, 50 % Max Percentage of Glycol, Brass
- Manufacturer: Caleffi
- Brand Name: Caleffi
- Part#: CFI546367A
- MPN: 546367A
- Min. Order Qty: 1
- Qty. Interval: 1
-
Availability:
- Branch Availability
-
Price:
- View Parts
-
Other Branch Availability
DIRTMAG® removes non-ferrous debris from systems as small as 5 um. Ferrous debris forms in systems when iron or steel corrodes. This abrasive, extremely fine sediment is difficult to remove by traditional methods and can cause damage to heat exchangers and circulators. DIRTMAG® accomplishes 2-1/2 times the ferrous oxide removal performance of other dirt separators, delivering up to 100% elimination efficiency.
Caleffi Dirt Separator, 5463 Series, 1-1/4 in Nominal, Press Connection, 150 psi, 32 to 250 deg F, Suitable Media: Glycol Solution, Water, 50 % Maximum Percentage of Glycol, 15 gpm Flow Rate, 5 um Particle Separation Capacity, Brass, 7-7/16 in W
| Connection Type | : | Press |
| Dimensions | : | 7-7/16 in W |
| Flow Rate | : | 15 gpm |
| Material | : | Brass |
| Maximum Percentage of Glycol | : | 50 % |
| Nominal Size | : | 1-1/4 in |
| Particle Separation Capacity | : | 5 um |
| Pressure Rating | : | 150 psi |
| Series | : | 5463 Series |
| Suitable Media | : | Glycol Solution, Water |
| Temperature Rating | : | 32 to 250 deg F |
- 1/2 in NPT top thread with plug
- Ferrous impurities separation efficiency up to 100% removal
- Low velocity zone and large dirt capture area pipe velocity slows by a factor of 9 as fluid enters chamber
- Unlike strainers which clog and cause increased pressure drop, debris is removed from the flow path and captured in lower bowl area, simplifying and reducing frequency of cleaning
- Powerful neodymium rare earth magnets magnetic field attracts and captures microscopic ferrous oxide impurities
- Removes 2-1/2 times the ferrous oxide compared to other dirt separators
- Top access port 1/2 in NPT top provides convenient chemical additive dosing port
- Robust mesh construction unique dirt separation mesh uses deflection and gravity to separate dirt particles as small as 5 um from flow stream
- Concentric pattern design has low flow resistance resulting in 85% less pressure drop compared to same size Y-strainers
- Clip-on magnetic ring and convenient purge valve, opening purge valve and removing magnetic ring releases captured magnetic impurities and purges all dirt without shutting down the system
- Corrosion-resistant, all components highly-resistant to hydronic chemical additives or unstable pH fluid
Catalog
Video Link