Caleffi DIRTMAG® 546309A Dirt Separator With Brass Magnet, 2 in, FNPT, 50 % Max Percentage of Glycol, Brass

The dirt separating action performed by the DIRTCAL® is based on using the internal element with concentric diamond pattern mesh surfaces instead of a mechanical filter. The element offers little resistance to the medium flow while ensuring dirt separation. This occurs due to the particles colliding with the concentric diamond pattern mesh surfaces and then settling to the bottom and not by filtration, which, over time, gets continuously clogged. By contrast, the DIRTCAL® low velocity zone dirt separator requires a pressure drop 25% or less than that of a comparable Y-strainers depending on mesh size and amount of filtered debris. It efficiently removes the particles to as small as 5 um (0.2 mil) with very low head loss. The dirt collection chamber at the bottom of the DIRTCAL® is at the optimal distance from the inlet and outlet connections to ensure that the collected dirt particles are not affected by the swirling flow through the mesh element. The dirt can then be removed through the bottom drain port even with the system running by opening the drain valve. Low head losses and performance are maintained over time.

Caleffi Dirt Separator, 5463 Series, 2 in Nominal, FNPT Connection, 150 psi, 32 to 250 deg F, Suitable Media: Glycol, Water, 50 % Maximum Percentage of Glycol, 36 gpm Flow Rate, 81 Cv Flow Coefficient (Cv), 5 um Particle Separation Capacity, Brass, 5-1/8 in W

• 100% ferrous impurities separation efficiency
• 1/2 in NPT top thread with plug

• Catalog https://assets.unilogcorp.com/267/ITEM/DOC/Caleffi_502620A_Catalog.pdf
• Instruction/Installation Manual https://assets.unilogcorp.com/267/ITEM/DOC/Caleffi_546306A_Instruction_Installation_Manual.pdf