UCAN IPA 1438 Drop-In Anchor, Imperial, 1/4 in Dia, 1 in L, 1/4-20 Thread, Carbon Steel, Zinc-Plated

The UCAN drop-in anchor is an internally threaded anchor, which is preassembled with an internal expansion plug. These anchors are available in both carbon steel and stainless steel. The carbon steel anchor is zinc-plated to extend corrosion protection. For best results, use with UCAN ANSI size drill bits and UCAN installation or setting tools. The stepped installation tool allows for correct anchor setting. Both manual and auto setting tools are available. The anchor is designed to deliver consistent holding power at shallow embedment. Three popular sizes are FM Approved, 3/8 to 1/2, 1/2 to 5/8 in and 5/8 to 78 in.

UCAN Drop-In Anchor, System of Measurement: Imperial, 1/4 in Diameter, 1 in Length, 1/4-20 Thread, 7/16 in Thread Depth, UNC Thread, 1 in Minimum Embedment, 3/8 in Drill, 13.54 kN Tensile Strength, 10.45 kN Shear Strength, Carbon Steel, Finish: Zinc-Plated, Applicable Materials: Block, Brick, Concrete, Masonry

• Pre-assembled design
• Can be used in flush or countersunk applications

• Catalog https://assets.unilogcorp.com/267/ITEM/DOC/UCAN_IPA_1258_Catalog.pdf
• Video Link http://www.ucanfast.com/Movie/drop-in-anchor-system/drop-in-anchor-system.mp4