Mission™ BAND-SEAL® CP Series CP200 Specialty Coupling, 2 x 2 in, Cast Iron, Plastic, Steel x Cast Iron, Plastic, Steel

Shielded transition couplings connect 2 in cast iron, plastic or steel pipe to 2 in cast iron, plastic or steel pipe. For non-pressure, gravity flow applications only. Recommended for above ground installations. easy-to-install and reuse.

Mission™ BAND-SEAL® Specialty Coupling, CP Series, 2 x 2 in Fitting, Cast Iron, Plastic, Steel x Cast Iron, Plastic, Steel Connection, 1500 psi Tensile Strength, 250 % Elongation, 60 in-lb Torque, Material Standard: ASTM A240, A240M-06, ASTM C564-03, ASTM C1460-00, Stainless Steel, 158 deg F, 9.38 in L x 2.12 in W, Domestic/Import: Domestic

• Shielded transition coupling
• MISSIONMADE™ products are easy-to install and reuse
• Increased band tension secures pipe end, forming a watertight seal, axially tapered design distributes and dissipates internal stresses
• Stainless steel components resist corrosion in various environments
• Thick shear band controls load bearing between coupling and pipe surface, opposing shear forces while maintaining pipe alignment
• Sealing O-ring under each clamp prevent pipe end slippage for a reinforced joint seal
• Internal pipe stop for proper pipe positioning and noise/vibration reduction
• Natural rubbers permit considerable distortion withstanding tension and compression, more pliable, easier to install in cold weather applications than elastomeric PVC gaskets
• Internal rubber sleeve reduces noise and vibration
• Easy-to-assemble, disassemble and reuse
• Resists shear forces while maintaining alignment

• Catalog https://assets.unilogcorp.com/267/ITEM/DOC/Mission_CK115_Catalog.pdf
• Instruction/Installation Manual https://assets.unilogcorp.com/267/ITEM/DOC/Mission_CP150_Instruction_Installation_Manual.pdf
• Specification Sheet https://assets.unilogcorp.com/267/ITEM/DOC/Mission_CP150_Specification_Sheet.pdf
• Submittal https://assets.unilogcorp.com/267/ITEM/DOC/Mission_CP150_Submittal.pdf