Bard® WH483-C WH483-C0ZEP4XXR Heat Pump Package Unit, 4 ton Nominal, 46000 Btu/hr Heating Btu, 460 VAC, 13 A

Bard® Heat Pump Package Unit, Series: WH, WH483-C Model, 4 ton Nominal, 47000 Btu/hr Cooling Cooling BTU Rating, 46000 Btu/hr Heating Heating BTU Rating, 460 VAC, 13 A, 1/3 hp Fan Motor, 1/2 hp Blower Motor, 60 Hz, 3 -Phase, 825 rev/min Fan Motor, 1070 rev/min Blower Motor, Scroll Compressor, 2750 cu-ft/min Fan Motor, 1550 cu-ft/min Blower Motor, 9 EER, R-22 Refrigerant, 15 A Fuse, Wall Mounting, 20 x 30 x 1 in Filter, 20 ga Steel, Galvanized, Zinc-Coated, Buckeye Gray, 42.075 in W x 84.875 in H x 22.4375 in D

• Revision code (3)
• Economizer (internal) - fully modulating, (EIFM-5C field installed part no)
• 2 in pleated filter
• Front (standard) supply air outlet
• Standard coil
• Low pressure control is auto reset, it includes a lock-out feature and is resettable from the wall thermostat, all low pressure controls use a timed bypass circuit to prevent nuisance tripping during low temperature start-up, low ambient control includes an 8201-008 (fan relay) and permits cooling operation down to 0 deg F, outdoor thermostat is adjustable from 0 - 50 deg F, it is suitable for use as a compressor cut-off thermostat
• 6.2 A-rated load, 6.5 A branch circuit selection current, 46 A locked rotor compressor, 1.3 A fan motor, 1.9 A blower motor
• Self-contained energy efficient heating and cooling system
• Aluminum finned copper coils - grooved tubing and enhanced louvered fin for maximum heat transfer and energy efficiency
• Twin blowers - move air quietly
• High pressure switch is built-in with a lockout circuit that resets from the room thermostat
• Full length mounting brackets
• Electrical components - are easily accessible for routine inspection and maintenance through a right side, service panel opening
• Electric heat strips - features an automatic limit and thermal cut-off safety control
• Suction accumulator - protects the reciprocating compressor from refrigerant flood back and prevents damage to the compressor bearing surfaces
• Condenser fan and motor shroud assembly slide out for easy access
• Slope top - standard feature for water run-off
• Top rain flashing - standard feature on all models
• Solid-state electronic heat pump control - provides efficient 30, 60 or 90 min defrost cycle
• 5 min compressor time delay - short cycle protection is standard, built into the heat pump control

• Instruction/Installation Manual https://assets.unilogcorp.com/267/ITEM/DOC/Bard_WH483_A05EP4XXO_Manual.pdf
• Specification Sheet https://assets.unilogcorp.com/267/ITEM/DOC/Bard_WH483_A15XX4XXX_Specification_Sheet.pdf