Russell All-Temp Series AE26-75C AE26-75C-DP Unit Cooler, 8700 Btu/hr, 1500 cfm, 115 V, 60 Hz, 1 ph

The Russell all-temp B is the original low profile unit cooler that has established an industry standard as being the all-purpose design for walk-in coolers, freezers and other applications. They feature an air draw through design offering air, electric and hot gas defrost models. Rust-free, heavy gauge, textured Aluminum casing is lightweight yet durable. Each fan section is baffled to prevent short cycling of the air. The unit is designed to mount flush to the ceiling and meets all NSF requirements. Slotted hangers are provided for easy installation. Drain fittings are installed in the horizontal position to gain more usable headroom in low ceiling applications. The end panels now are hinged to open up out for easy access to both the piping and electrical ends. Optional expansion valves can be conveniently installed inside the cabinet.

Russell Unit Cooler, Series: All-Temp, Model: AE26-75C, 115 V, 1 A, 1600 W, 1/20 hp, 60 Hz, 1 ph, 8700 Btu/hr, 1500 cfm, NPT Connection, 1/2 in Connection, Aluminum Fin, Aluminum Tube Sheet Coil, R-404A Refrigerant, 12 in Fan, 2 Fans, PSC Motor, 6 FPI Fins per Inch, Flush to Ceiling Mounting, Aluminum, Finish: Embossed, 15 in H x 15-1/4 in W

• The embossed aluminum casing is lightweight yet durable
• Each fan section is baffled to prevent short cycling of the air
• The unit is designed to mount flush to the ceiling and meets all NSF requirements
• The top pan is slotted for simple installation
• Drain fittings are installed in the bottom of the drain pan for easy field connection and the drain fitting can be quickly replaced without replacing the entire drain pan
• The end panels can now be slid out from the front of the unit for easy serviceability from the front or end of the unit
• Copper hairpins are staggered and mechanically expanded into corrugated aluminum fins and tube sheets to achieve maximum heat transfer
• Heavy-duty 12 in aluminum fans are balanced to provide vibration-free operation
• Our low throw black plastic fan guards provide an optimal air pattern
• Designed for use in coolers and freezers between -20 - 34 deg F
• Internal coil heaters provide rapid and efficient defrost
• A lower heater is installed close to the drain pan for fast, reliable drainage
• A defrost termination fan delay thermostat (DTFD) terminates the defrost cycle when the temperature is satisfied
• The fan delay allows the warm coil to cool after a defrost cycle prior to the fans turning on
• A heater safety thermostat is installed to prevent heaters from overheating above 75 deg F
• One-year limited warranty

• Catalog https://assets.unilogcorp.com/267/ITEM/DOC/Russell_AE26_75C_DP_Catalog.pdf