BOSCH Aquarius EC EC0241CSNXXX Water Source Heat Pump, 25000 Btu/hr Cooling, 30000 Btu/hr Heating BTU, 208 - 230 VAC

BOSCH Water Source Heat Pump, Series: Aquarius EC, Model: EC024, 25000 Btu/hr Cooling, 30000 Btu/hr Heating, 208 - 230 VAC, 11.1 A, 1/4 hp, 60 Hz, 1 Phase, 670 - 900rpm at 0.1 External Static Pressure Rotational Speed, 850 cfm at 6 gal/min CFM Rating, 13.8 Water Loop EER Rating, 3/4 in FPT Condensate Drain/Water, 1/2 in FPT Heat Recovery Kit Connection, Reciprocating Compressor, R-410A Refrigerant, 15 A Fuse Rating, 2.12 sq-ft Area, 14 Fins/in Coil Rating, 0.5 - 6 ton Tonnage, Condensing Section, Heavy Gauge Steel, Galvalume Plus, Aluminum-Zinc Alloy with Clear Acrylic-Coated

• Cupro-nickel heat exchanger
• Front water connections
• 450 lbf/sq-in working pressure
• The units shall be designed to operate with entering fluid temperatures between 50 - 100 deg F in cooling and between 50 - 80 deg F in heating
• The interior shall be insulated with 1/2 in Thick, multi-density, coated, glass fiber
• All units shall allow sufficient service access to replace the compressor without unit removal
• One-blower and two-compressor compartment access panels shall be removable with supply and return ductwork in place, a duct collar shall be provided on the supply air opening
• Units shall have a 1 in Thick throwaway-type glass fiber filter as standard, filter rack shall incorporate a 1 in duct flange
• The units shall have an insulated divider panel between the air handling section and the compressor section to minimize the transmission of compressor noise and to permit service testing without air bypass
• Units shall have a stainless steel condensate drain pan
• Units shall have a floating base pan consisting of a 1/2 in Thick high density rubber pad between the compressor/condenser base plate and the unit base pan
• All units shall contain a sealed refrigerant circuit including capillary tube metering device with strainer or balance port expansion valve, refrigerant drier, finned tube air-to-refrigerant heat exchanger, refrigerant reversing valve and service ports
• The fan shall be direct-drive centrifugal forward curved-type with dynamically balanced wheel, housing and wheel shall be designed for quiet low velocity operation
• The fan housing shall be removable from the unit without disconnecting the supply air ductwork for servicing of the fan motor
• The motor shall be permanently lubricated and have thermal overload protection
• Controls and safety devices will be factory wired and mounted within the unit

• Catalog https://assets.unilogcorp.com/267/ITEM/DOC/Bosch_Thermotechnology_EC0421CSNFXX_Catalog.pdf
• Instruction/Installation Manual https://assets.unilogcorp.com/267/ITEM/DOC/Bosch_Thermotechnology_EC0421AHXXLS_Manual.pdf