MODINE PDP250AE130 Propeller Unit Heater, 115 V, 7.75 A, 250000 Btu/hr BTU, 1 ph-Phase, Steel
- Manufacturer: Modine Mfg Co
- Brand Name: MODINE
- Part#: IMS_PDP250AE130
- MPN: PDP250AE130
- UPC: 046629437155
- Min. Order Qty: 1
- Qty. Interval: 1
-
Availability:
- Branch Availability
-
Price:
-
Other Branch Availability
MODINE Propeller Unit Heater, 250000 Btu/hr, 115 V, 7.75 A, 1053 fpm, 3700 cfm CFM Rating, 1/3 hp HP Rating, 1 ph, 60 Hz, NPT, 1/2 in, Liquid Propane Gas, Natural Gas, 20 in Fan Size, 83 % Efficiency, PSC Motor, 1075 rpm Rotational Speed, Intermittent Pilot Ignition, 1 Stage, 19 ft Mounting Height, 67 ft Heat Throw, Steel, Baked-On Polyester Powder-Coated, 50 deg F, 40-1/4 in H x 25-5/8 in W x 34-3/4 in D
| Amperage Rating | : | 7.75 A |
| BTU Rating | : | 250000 Btu/hr |
| CFM Rating | : | 3700 cfm |
| Connection Size | : | 1/2 in |
| Connection Type | : | NPT |
| Dimensions | : | 40-1/4 in H x 25-5/8 in W x 34-3/4 in D |
| Efficiency | : | 83 % |
| Fan Size | : | 20 in |
| Finish | : | Baked-On Polyester Powder-Coated |
| Flow Rate | : | 1053 fpm |
| Frequency Rating | : | 60 Hz |
| Fuel Type | : | Liquid Propane Gas, Natural Gas |
| HP Rating | : | 1/3 hp |
| Heat Throw | : | 67 ft |
| Ignition Type | : | Intermittent Pilot |
| Material | : | Steel |
| Motor Type | : | PSC |
| Mounting Height | : | 19 ft |
| Number of Stages | : | 1 |
| Phase | : | 1 ph |
| Rotational Speed | : | 1075 rpm |
| Temperature Rating | : | 50 deg F |
| Voltage Rating | : | 115 V |
- 80% thermal efficiency, maximizing seasonal efficiency through the use of a collector box and the power exhauster
- A power exhaust that can be rotated 180 deg, the unit can be vented vertically or horizontally
- A 100% shut-off, intermittent pilot-ignition system with continuous retry, at no extra charge, this ignition system allows for all PDP/BDP units to be field converted to propane, if desired
- A safety pressure switch to assure safe venting conditions
- Designed to utilize the smallest diameter vent pipe possible
- Wing screws so that the bottom pan can be dropped without a screwdriver or nut driver
- A levels hanging mechanism for easy field adjustments after adding accessories that may change the unit's center of gravity
- Aluminized steel heat exchanger or burner
- A automatic reset vent pressure switch is supplied on all power vented unit heaters to prevent operation of the main burner in the event there is restricted venting of flue products
- All power vented unit heaters are supplied with a round vent pipe connection, power exhauster may be rotated 180 deg to allow for various venting directions
Catalog