FRIGIDAIRE® FT4BF Series 919669F Split-System Heat Pump, 208 to 230 V, 24 A, 48000 Btu/hr Cooling/Heating BTU, 0.33 hp
- Manufacturer: ElectroLux Products
- Brand Name: FRIGIDAIRE®
- Part#: IMS_919669F
- MPN: 919669F
- Min. Order Qty: 1
- Qty. Interval: 1
-
Availability:
- Branch Availability
-
Price:
-
Other Branch Availability
FRIGIDAIRE® Split-System Heat Pump, FT4BF Series, Model: FT4BF-048KA, 208 to 230 V, 24 A, 0.33 hp, 60 Hz, 1 ph Phase, 48000 Btu/hr Cooling/Heating, 1140 to 1700 cfm, 12.5 EER Rating, 16 SEER, 9 HSPF, Brazed Connection, Scroll Compressor, R-410A Refrigerant, 3/8 in Liquid Line, 7/8 in Suction Line, 50 A Fuse Rating, 25.4 sq-ft Face Area, 18 FPI Coil, Tonnage: 4 ton, 72 dBA Sound Level, 2 Stages, Steel, Finish: Galvanized/Polyester Urethane-Coated, 45-1/2 in H x 31-1/4 in W x 31-1/4 in D
| Amperage Rating | : | 24 A |
| BTU Rating | : | 48000 Btu/hr Cooling/Heating |
| CFM Rating | : | 1140 to 1700 cfm |
| Coil Rating | : | 25.4 sq-ft Face Area, 18 FPI |
| Compressor Type | : | Scroll |
| Connection Type | : | Brazed |
| Dimensions | : | 45-1/2 in H x 31-1/4 in W x 31-1/4 in D |
| EER Rating | : | 12.5 |
| Finish | : | Galvanized/Polyester Urethane-Coated |
| Frequency Rating | : | 60 Hz |
| Fuse Rating | : | 50 A |
| HP Rating | : | 0.33 hp |
| HSPF Rating | : | 9 |
| Liquid Line Size | : | 3/8 in |
| Material | : | Steel |
| Model | : | FT4BF-048KA |
| Number of Stages | : | 2 |
| Phase | : | 1 ph |
| Refrigerant Type | : | R-410A |
| SEER Rating | : | 16 |
| Series | : | FT4BF Series |
| Sound Level | : | 72 dBA |
| Suction Line Size | : | 7/8 in |
| Tonnage | : | 4 ton |
| Voltage Rating | : | 208 to 230 V |
- ComfortAlert™ module detects system and electrical problem conditions, a diagnostics key directs the service technician to the root cause of a problem
- Composite base pan - absorbs sound and corrosion-resistant, composite is also stronger and lighter than steel
- Copper tube/aluminum fin coils - both indoor and outdoor coils are designed to optimize heat transfer, minimize size and cost, increase durability and reliability
- Demand defrost - provides additional energy savings in heating by defrosting only when necessary
- Louvered condenser guard - durable metal guard protects the coil from yard hazards and extreme weather
- Removable top grille assembly - allows ease of service from the top without disconnecting fan motor leads
- Compressor sound blanket engineered to significantly reduce unwanted compressor noise
- Swept wing fan blade engineered to provide quiet operation, the specific energy absorbing hub is designed to reduce noise while operating through various frequencies
- Low pressure switch loss charge protection ensures long compressor life, auto reset feature prevents nuisance service visit
- High pressure switch protects against abnormally high-system pressures, auto reset feature prevents nuisance service visits
- Liquid line filter drier included with unit, field installed
- One-piece top orifice designed for maximum airflow and quiet operation
- Common suction service port - this port allows the contractor to read the suction pressure in all modes of operation without removing any panels, saving time and increasing serviceability
- When the unit shuts down, a 3 min delay keeps the unit from restarting, eliminating the highest cause for compressor failure
- Suction accumulator - protection from liquid flood back and future compressor failures
- Hot gas muffler reduces compressor noise and vibration
- Easy compressor and control access make servicing easier for the contractor, access panels are provided to all controls and the compressor from the side of the unit
- Two-speed BLDC motor, two-fan blade, 24 in Dia
- 21.1 A rated load, 96 A locked rotor compressor
Specification Sheet