BOSCH WW WW0601USCFXX Geothermal Heat Pump, 208 - 230 VAC, 60 Hz, 1 -Phase

The WW model water-to-water unit's cooled modular reverse cycle chillers are designed to meet all your requirements. The WW model is available for commercial applications from 10 - 35 ton. Water-to-water units can be utilized for hydronic heating or make-up air applications just to mention a few of the many potential applications. The modular design gives you the flexibility to install units individually or in any combination to match the exact load requirement for your commercial project. Our chillers have a fraction of the refrigerant charge of central station chillers and operate at a significantly reduced sound level. If you need to replace an old chiller or install a new quiet one, FHP has the versatility design. The units fit easily through a standard 36 in door.

BOSCH Geothermal Heat Pump, Series: WW, Model: WW060, 208 - 230 VAC, Water Loop: 51300 Btu/hr Cooling, 75500 Btu/hr Heating, Ground Water: 56000 Btu/hr Cooling, 62000 Btu/hr Heating and Ground Loop: 53000 Btu/hr Cooling, 50500 Btu/hr Heating, 60 Hz, 1 Phase, R-410A Refrigerant, 12.7 Water Loop, 19.2 Ground Water, 14.6 Ground Loop EER Rating, 1 or 2 Stages, Scroll Compressor, Unit-Mounted Controller Cabinet Configuration, Steel Cabinet, Galvanized, Water Loop: 86 deg F Cooling, 68 deg F Heating, Ground Water: 59 deg F Cooling, 50 deg F Heating, Ground Loop: 77 deg F Cooling, 32 deg F Heating, 24-1/4 in H x 32-1/2 in W x 24 in D

• 75 V-A transformer
• TXV valve
• Remote reset at thermostat
• Fault LED indication
• Four-way reversing valve
• Filter drier
• Copper source side coax
• Front water connections

• Catalog https://assets.unilogcorp.com/267/ITEM/DOC/Bosch_Thermotechnology_WT0611USCFXX_Catalog.pdf
• Instruction/Installation Manual https://assets.unilogcorp.com/267/ITEM/DOC/Bosch_Thermotechnology_WW0243CSC_Manual.pdf
• Specification Sheet https://assets.unilogcorp.com/267/ITEM/DOC/Bosch_Thermotechnology_WW0601USCFXX_Specification_Sheet.pdf