PROTECH™ 84-HRV 84-HRV100 Heat Recovery Ventilator, 100 cu-ft/min Air Flow, 120 V, 1.4 A, 20 ga Steel, Pre-Painted

Heat recovery ventilators (HRVs) are fresh air exchange appliances that take fresh air into a dwelling, clean and evenly circulate the fresh air and expel stale, polluted air while controlling humidity and minimizing heat loss/gain. The HRVs are identical except for the recovery core (heat exchanger). HRVs are used primarily in cold northern climates while ERVs are used in the middle and southern U.S. The HRV systems use centrifugal blowers to remove the stale indoor air. The incoming and outgoing air streams moving through the system capture and transfer the heat from one air stream to another, while passing through a patented set of exchange cores. The temperature level from the indoor air is retained and transferred to the new incoming fresh outdoor air before circulating throughout the house.

PROTECH™ Heat Recovery Ventilator, Series: 84-HRV, 100 cu-ft/min Air Flow, 1.4 A, 120 V, 20 ga Steel, Pre-Painted, 30-1/4 in L, 13-3/4 in W, 20 in H

• Constructed of pre-painted steel and lined with foil-faced fiberglass insulation to minimize energy loss
• 6 in round inlets and outlets for easy duct connections
• Smart defrost system to prevent freeze-ups
• 20 ga pre-painted steel with corrosion-resistant finish
• Built-in 1/2 in drain tube connection fittings
• Integral balancing dampers for balancing air flow
• Easily removable, washable, metal framed air filters
• PSC motor designed for constant operation
• 3-optional blower speeds, 2-speed settings
• Ultra quiet blower design
• Deeper one-piece condensate tray
• Sturdy damper design for adverse weather conditions
• Cord connected connection type
• Life time core warranty, two-years limited parts warranty

• Catalog https://assets.unilogcorp.com/267/ITEM/DOC/PROTECH_84_HRV100_Catalog.pdf